lkml.org 
[lkml]   [2021]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 04/12] iio: adc: ad7192: handle zero Avdd regulator value
On Thu, May 13, 2021 at 10:43 AM Lars-Peter Clausen <lars@metafoo.de> wrote:
>
> On 5/12/21 7:49 PM, Alexandru Ardelean wrote:
> > This change fixes a corner-case, where for a zero regulator value, the
> > driver would exit early, initializing the driver only partially.
> > The driver would be in an unknown state.
> >
> > If the regulator value is zero, then the internal reference will be zero
> > (though that value will be zero for anything less than 1 millivolt).
> >
> > Fixes: ab0afa65bbc7 ("staging: iio: adc: ad7192: fail probe on get_voltage")
> > Cc: Alexandru Tachici <alexandru.tachici@analog.com>
> > Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
> > ---
> > drivers/iio/adc/ad7192.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
> > index d3be67aa0522..9da394ad3868 100644
> > --- a/drivers/iio/adc/ad7192.c
> > +++ b/drivers/iio/adc/ad7192.c
> > @@ -951,7 +951,7 @@ static int ad7192_probe(struct spi_device *spi)
> >
> > voltage_uv = regulator_get_voltage(st->avdd);
> >
> > - if (voltage_uv > 0) {
> > + if (voltage_uv >= 0) {
> > st->int_vref_mv = voltage_uv / 1000;
> > } else {
> > ret = voltage_uv;
>
> More idiomatic would be to check for voltage_uv < 0.

sure;
makes sense
will re-spin

>
> if (voltage_uv < 0) {
> ret = voltage_uv;
> dev_err(&spi->dev, "Device tree error, reference voltage
> undefined\n");
> goto error_disable_avdd;
> }
>
> st->int_vref_mv = voltage_uv / 1000;
>

\
 
 \ /
  Last update: 2021-05-13 11:13    [W:0.072 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site