lkml.org 
[lkml]   [2021]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 04/12] iio: adc: ad7192: handle zero Avdd regulator value
Date
This change fixes a corner-case, where for a zero regulator value, the
driver would exit early, initializing the driver only partially.
The driver would be in an unknown state.

If the regulator value is zero, then the internal reference will be zero
(though that value will be zero for anything less than 1 millivolt).

Fixes: ab0afa65bbc7 ("staging: iio: adc: ad7192: fail probe on get_voltage")
Cc: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
drivers/iio/adc/ad7192.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index d3be67aa0522..9da394ad3868 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -951,7 +951,7 @@ static int ad7192_probe(struct spi_device *spi)

voltage_uv = regulator_get_voltage(st->avdd);

- if (voltage_uv > 0) {
+ if (voltage_uv >= 0) {
st->int_vref_mv = voltage_uv / 1000;
} else {
ret = voltage_uv;
--
2.31.1
\
 
 \ /
  Last update: 2021-05-12 23:31    [W:1.164 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site