lkml.org 
[lkml]   [2021]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] ARM: dts: Fix-up EMMC2 controller's frequency
From
Date
Hi Al,

On Wed, 2021-04-07 at 16:37 -0400, Alan Cooper wrote:
> Nicolas,
>
> I got a better description of the failure and it looks like the bus
> clock needs to be limited to 300KHz for a 500MHz core clock.
> What's happening is that an internal reset sequence is needed after a
> command timeout and the reset signal needs to be asserted for at least
> 2 ticks of the bus clock. This is done using a 12 bit counter clocked
> by the core clock. That means a 500MHz core clock produces a 122KHz
> reset signal which is too fast for 2 ticks of the 200KHz bus clock
> (100KHz) but is okay for the 300KHz (150Khz) bus clock.

Thanks for the info. I'll work something out.

Regards,
Nicolas

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-04-09 11:29    [W:0.068 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site