lkml.org 
[lkml]   [2021]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] Allwinner H6 USB3 device tree updates
Date
While implementing support for this USB controller in U-Boot, I noticed
that the reset line alsp affects they PHY. It looks like most platforms
use a separate glue node to represent this, and in fact there is already
a compatible for the H6 listed in drivers/usb/dwc3/dwc3-of-simple.c.

Since this layout matches the usual way of modeling this hardware, it
allows using the existing drivers without adding platform-specific code.

Samuel Holland (2):
dt-bindings: usb: Document the Allwinner H6 DWC3 glue
arm64: dts: allwinner: h6: Wrap DWC3 and PHY in glue layer

.../usb/allwinner,sun50i-h6-dwc3.yaml | 75 +++++++++++++++++++
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 6 +-
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 6 +-
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +--
.../dts/allwinner/sun50i-h6-tanix-tx6.dts | 6 +-
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 60 ++++++++-------
6 files changed, 115 insertions(+), 47 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml

--
2.26.3

\
 
 \ /
  Last update: 2021-04-21 06:29    [W:0.075 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site