lkml.org 
[lkml]   [2021]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next v3 0/6] provide generic net selftest support
Date
changes v3:
- make more granular tests
- enable loopback for all PHYs by default
- fix allmodconfig build errors
- poll for link status update after switching to the loopback mode

changes v2:
- make generic selftests available for all networking devices.
- make use of net_selftest* on FEC, ag71xx and all DSA switches.
- add loopback support on more PHYs.

This patch set provides diagnostic capabilities for some iMX, ag71xx or
any DSA based devices. For proper functionality, PHY loopback support is
needed.
So far there is only initial infrastructure with basic tests.

Oleksij Rempel (6):
net: phy: execute genphy_loopback() per default on all PHYs
net: phy: genphy_loopback: add link speed configuration
net: add generic selftest support
net: fec: make use of generic NET_SELFTESTS library
net: ag71xx: make use of generic NET_SELFTESTS library
net: dsa: enable selftest support for all switches by default

drivers/net/ethernet/atheros/Kconfig | 1 +
drivers/net/ethernet/atheros/ag71xx.c | 20 +-
drivers/net/ethernet/freescale/Kconfig | 1 +
drivers/net/ethernet/freescale/fec_main.c | 7 +
drivers/net/phy/phy.c | 3 +-
drivers/net/phy/phy_device.c | 35 +-
include/linux/phy.h | 1 +
include/net/dsa.h | 2 +
include/net/selftests.h | 12 +
net/Kconfig | 4 +
net/core/Makefile | 1 +
net/core/selftests.c | 400 ++++++++++++++++++++++
net/dsa/Kconfig | 1 +
net/dsa/slave.c | 21 ++
14 files changed, 500 insertions(+), 9 deletions(-)
create mode 100644 include/net/selftests.h
create mode 100644 net/core/selftests.c

--
2.29.2

\
 
 \ /
  Last update: 2021-04-19 15:01    [W:0.143 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site