lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH] USB:XHCI:skip hub registration
Date
When the number of ports on the USB hub is 0, skip the registration
operation of the USB hub.

The current Kunpeng930's XHCI hardware controller is defective. The number
of ports on its USB3.0 bus controller is 0, and the number of ports on
the USB2.0 bus controller is 1.

In order to solve this problem that the USB3.0 controller does not have
a port which causes the registration of the hub to fail, this patch passes
the defect information by adding flags in the quirks of xhci and usb_hcd,
and finally skips the registration process of the hub directly according
to the results of these flags when the hub is initialized.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
---
drivers/usb/core/hub.c | 6 ++++++
drivers/usb/host/xhci-pci.c | 4 ++++
drivers/usb/host/xhci.c | 5 +++++
drivers/usb/host/xhci.h | 1 +
include/linux/usb/hcd.h | 1 +
5 files changed, 17 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b1e14be..2d6869d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1769,9 +1769,15 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
struct usb_host_interface *desc;
struct usb_device *hdev;
struct usb_hub *hub;
+ struct usb_hcd *hcd;

desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
+ hcd = bus_to_hcd(hdev->bus);
+ if (hcd->usb3_no_port) {
+ dev_warn(&intf->dev, "USB hub has no port\n");
+ return -ENODEV;
+ }

/*
* Set default autosuspend delay as 0 to speedup bus suspend,
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ef513c2..63b89a4 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -281,6 +281,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
+
+ if (pdev->vendor == PCI_VENDOR_ID_HUAWEI &&
+ pdev->device == 0xa23c)
+ xhci->quirks |= XHCI_USB3_NOPORT;
}

#ifdef CONFIG_ACPI
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index bee5dec..e3e3573 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5184,6 +5184,11 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
/* xHCI private pointer was set in xhci_pci_probe for the second
* registered roothub.
*/
+ if (xhci->quirks & XHCI_USB3_NOPORT) {
+ xhci_info(xhci, "xHCI host has no port\n");
+ hcd->usb3_no_port = 1;
+ }
+
return 0;
}

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2c6c4f8..d3c658f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1874,6 +1874,7 @@ struct xhci_hcd {
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
+#define XHCI_USB3_NOPORT BIT_ULL(37)

unsigned int num_active_eps;
unsigned int limit_active_eps;
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 3dbb42c..7df23a0f 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -172,6 +172,7 @@ struct usb_hcd {
unsigned tpl_support:1; /* OTG & EH TPL support */
unsigned cant_recv_wakeups:1;
/* wakeup requests from downstream aren't received */
+ unsigned usb3_no_port:1; /* xHCI main_hcd has no port */

unsigned int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
--
2.8.1
\
 
 \ /
  Last update: 2021-04-15 14:27    [W:0.944 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site