lkml.org 
[lkml]   [2021]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] powerpc/pseries: Add shutdown() to vio_driver and vio_bus
Date
Currently, neither the vio_bus or vio_driver structures provide support
for a shutdown() routine.

Add support for shutdown() by allowing drivers to provide a
implementation via function pointer in their vio_driver struct and
provide a proper implementation in the driver template for the vio_bus
that calls a vio drivers shutdown() if defined.

In the case that no shutdown() is defined by a vio driver and a kexec is
in progress we implement a big hammer that calls remove() to ensure no
further DMA for the devices is possible.

Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
arch/powerpc/include/asm/vio.h | 1 +
arch/powerpc/platforms/pseries/vio.c | 16 ++++++++++++++++
2 files changed, 17 insertions(+)

diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h
index 721c0d6715ac..e7479a4abf96 100644
--- a/arch/powerpc/include/asm/vio.h
+++ b/arch/powerpc/include/asm/vio.h
@@ -114,6 +114,7 @@ struct vio_driver {
const struct vio_device_id *id_table;
int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
void (*remove)(struct vio_dev *dev);
+ void (*shutdown)(struct vio_dev *dev);
/* A driver must have a get_desired_dma() function to
* be loaded in a CMO environment if it uses DMA.
*/
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 9cb4fc839fd5..d122b8644319 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -22,6 +22,7 @@
#include <linux/mm.h>
#include <linux/dma-map-ops.h>
#include <linux/kobject.h>
+#include <linux/kexec.h>

#include <asm/iommu.h>
#include <asm/dma.h>
@@ -1278,6 +1279,20 @@ static int vio_bus_remove(struct device *dev)
return 0;
}

+static void vio_bus_shutdown(struct device *dev)
+{
+ struct vio_dev *viodev = to_vio_dev(dev);
+ struct vio_driver *viodrv;
+
+ if (dev->driver) {
+ viodrv = to_vio_driver(dev->driver);
+ if (viodrv->shutdown)
+ viodrv->shutdown(viodev);
+ else if (kexec_in_progress)
+ vio_bus_remove(dev);
+ }
+}
+
/**
* vio_register_driver: - Register a new vio driver
* @viodrv: The vio_driver structure to be registered.
@@ -1613,6 +1628,7 @@ struct bus_type vio_bus_type = {
.match = vio_bus_match,
.probe = vio_bus_probe,
.remove = vio_bus_remove,
+ .shutdown = vio_bus_shutdown,
};

/**
--
2.27.0
\
 
 \ /
  Last update: 2021-04-02 02:17    [W:0.096 / U:1.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site