lkml.org 
[lkml]   [2021]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] enable flexspi support on imx8mp
Date

This series enables support for the SPI NOR on the
imx8mp based phyboard-pollux-rdk board.

Patches new in v2:
"spi: fspi: enable fspi driver for on imx8mp"
which adds own compatible entry for imx8mp

and seperate in own patch the documentation entry in
patch "dt-bindings: spi: add compatible entry for imx8mp in FlexSPI controller"
as checkpatch says:

warning: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst


Changes in v2:
- work in comments from Marco
add own compatible entry for imx8mp
- work in comments from Marco
- add own compatible entry "nxp,imx8mp-fspi"
- reworked order of properties as Marco mentioned
- work in comments from Marco and Teresa
- rename node into "'som_flash: flash@0 { }"
- compatible is now first entry
- removed #size-cells and #address-cells
as no child node. If bootloader adds them bootloader
can add them too.

Heiko Schocher (4):
spi: fspi: enable fspi driver for on imx8mp
dt-bindings: spi: add compatible entry for imx8mp in FlexSPI
controller
arm64: dts: imx8mp: add flexspi node
arm64: imx8mp: imx8mp-phycore-som enable spi nor

.../devicetree/bindings/spi/spi-nxp-fspi.txt | 1 +
.../dts/freescale/imx8mp-phycore-som.dtsi | 25 +++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 16 ++++++++++++
drivers/spi/spi-nxp-fspi.c | 1 +
4 files changed, 43 insertions(+)

--
2.29.2

\
 
 \ /
  Last update: 2021-03-09 06:33    [W:0.364 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site