lkml.org 
[lkml]   [2021]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv2 0/4] Bx50v3 DT improvements
Date
Bx50v3 DT improvements

These are a bunch of small unrelated improvements for the GE Bx50v3
device tree (and BA16 system on module, which is currently only used
by Bx50v3).

Changes since PATCHv1 [1]:
* change patch prefix for BA16 patches
* remove extra newline from PATCH 1/4
* keep 'status' at the end of FEC in PATCH 2/4

[1] https://lore.kernel.org/lkml/20210223183346.138575-1-sebastian.reichel@collabora.com/

Thanks for reviewing/merging them,

-- Sebastian

Ian Ray (1):
ARM: dts: imx: bx50v3: Define GPIO line names

Sebastian Reichel (3):
ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
ARM: dts: imx6q-ba16: improve PHY information
ARM: dts: imx: bx50v3: i2c GPIOs are open drain

arch/arm/boot/dts/imx6q-b450v3.dts | 5 +++++
arch/arm/boot/dts/imx6q-b650v3.dts | 5 +++++
arch/arm/boot/dts/imx6q-b850v3.dts | 5 +++++
arch/arm/boot/dts/imx6q-ba16.dtsi | 21 +++++++++++++++++++++
arch/arm/boot/dts/imx6q-bx50v3.dtsi | 12 ++++++------
5 files changed, 42 insertions(+), 6 deletions(-)

--
2.30.1

\
 
 \ /
  Last update: 2021-03-08 16:20    [W:0.042 / U:0.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site