lkml.org 
[lkml]   [2021]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
Date
From: Quanyang Wang <quanyang.wang@windriver.com>

The round_rate callback should only perform rate calculation and not
involve calling zynqmp_pll_set_mode to change the pll mode. So let's
move zynqmp_pll_set_mode out of round_rate and to set_rate callback.

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
drivers/clk/zynqmp/pll.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index fb16ddbb7e2d..1aea5c137b69 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -104,9 +104,7 @@ static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
/* Enable the fractional mode if needed */
rate_div = (rate * FRAC_DIV) / *prate;
f = rate_div % FRAC_DIV;
- zynqmp_pll_set_mode(hw, !!f);
-
- if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ if (f) {
if (rate > PS_PLL_VCO_MAX) {
fbdiv = rate / PS_PLL_VCO_MAX;
rate = rate / (fbdiv + 1);
@@ -177,10 +175,12 @@ static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
long rate_div, frac, m, f;
int ret;

- if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
- rate_div = (rate * FRAC_DIV) / parent_rate;
+ rate_div = (rate * FRAC_DIV) / parent_rate;
+ f = rate_div % FRAC_DIV;
+ zynqmp_pll_set_mode(hw, !!f);
+
+ if (f) {
m = rate_div / FRAC_DIV;
- f = rate_div % FRAC_DIV;
m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX));
rate = parent_rate * m;
frac = (parent_rate * f) / FRAC_DIV;
--
2.25.1
\
 
 \ /
  Last update: 2021-03-31 11:03    [W:0.059 / U:1.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site