Messages in this thread | | | Date | Mon, 29 Mar 2021 21:17:07 -0700 (PDT) | Subject | Re: [PATCH v4 0/5] Add Microchip PolarFire Soc Support | From | Palmer Dabbelt <> |
| |
On Wed, 03 Mar 2021 12:02:48 PST (-0800), Atish Patra wrote: > This series adds minimal support for Microchip Polar Fire Soc Icicle kit. > It is rebased on v5.12-rc1 and depends on clock support. > Only MMC and ethernet drivers are enabled via this series. > The idea here is to add the foundational patches so that other drivers > can be added to on top of this. The device tree may change based on > feedback on bindings of individual driver support patches. > > This series has been tested on Qemu and Polar Fire Soc Icicle kit. > It depends on the updated clock-series[2] and macb fix[3]. > The series is also tested by Lewis from Microchip. > > The series can also be found at. > https://github.com/atishp04/linux/tree/polarfire_support_upstream_v4 > > [1] https://lists.nongnu.org/archive/html/qemu-devel/2020-10/msg08582.html > [2] https://www.spinics.net/lists/linux-clk/msg54579.html > > Changes from v3->v4: > 1. Fixed few DT specific issues. > 2. Rebased on top of new clock driver. > 3. SD card functionality is verified. > > Changes from v2->v3: > 1. Fixed a typo in dt binding. > 2. Included MAINTAINERS entry for PolarFire SoC. > 3. Improved the dts file by using lowercase clock names and keeping phy > details in board specific dts file. > > Changes from v1->v2: > 1. Modified the DT to match the device tree in U-Boot. > 2. Added both eMMC & SDcard entries in DT. However, SD card is only enabled > as it allows larger storage option for linux distros. > > Atish Patra (4): > RISC-V: Add Microchip PolarFire SoC kconfig option > dt-bindings: riscv: microchip: Add YAML documentation for the > PolarFire SoC > RISC-V: Initial DTS for Microchip ICICLE board > RISC-V: Enable Microchip PolarFire ICICLE SoC > > Conor Dooley (1): > MAINTAINERS: add microchip polarfire soc support > > .../devicetree/bindings/riscv/microchip.yaml | 27 ++ > MAINTAINERS | 8 + > arch/riscv/Kconfig.socs | 7 + > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/microchip/Makefile | 2 + > .../microchip/microchip-mpfs-icicle-kit.dts | 72 ++++ > .../boot/dts/microchip/microchip-mpfs.dtsi | 329 ++++++++++++++++++ > arch/riscv/configs/defconfig | 4 + > 8 files changed, 450 insertions(+) > create mode 100644 Documentation/devicetree/bindings/riscv/microchip.yaml > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
I had this left in my inbox waiting for either some reviews to come in or a v2, but I don't see any. Did I miss something?
| |