lkml.org 
[lkml]   [2021]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/8] gpio: Add Elba SoC gpio driver for spi cs control
On Thu, Mar 4, 2021 at 12:29 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> Hi Brad,
>
> thanks for your patch!
>
> On Thu, Mar 4, 2021 at 4:42 AM Brad Larson <brad@pensando.io> wrote:
>
> > This GPIO driver is for the Pensando Elba SoC which
> > provides control of four chip selects on two SPI busses.
> >
> > Signed-off-by: Brad Larson <brad@pensando.io>
> (...)
>
> > +#include <linux/gpio.h>
>
> Use this in new drivers:
> #include <linux/gpio/driver.h>
>
> > + * pin: 3 2 | 1 0
> > + * bit: 7------6------5------4----|---3------2------1------0
> > + * cs1 cs1_ovr cs0 cs0_ovr | cs1 cs1_ovr cs0 cs0_ovr
> > + * ssi1 | ssi0
> > + */
> > +#define SPICS_PIN_SHIFT(pin) (2 * (pin))
> > +#define SPICS_MASK(pin) (0x3 << SPICS_PIN_SHIFT(pin))
> > +#define SPICS_SET(pin, val) ((((val) << 1) | 0x1) << SPICS_PIN_SHIFT(pin))
>
> So 2 bits per GPIO line in one register? (Nice doc!)
>
> > +struct elba_spics_priv {
> > + void __iomem *base;
> > + spinlock_t lock;
> > + struct gpio_chip chip;
> > +};
> > +
> > +static int elba_spics_get_value(struct gpio_chip *chip, unsigned int pin)
> > +{
> > + return -ENXIO;
> > +}
>
> Write a comment that the chip only supports output mode,
> because it repurposes SPI CS pins as generic GPIO out,
> maybe at the top of the file?
>

I'll add a comment regarding gpio pin mode. Yes output
only mode as SPI chip-selects.

> I suppose these systems also actually (ab)use the SPI cs
> for things that are not really SPI CS? Because otherwise
> this could just be part of the SPI driver (native chip select).
>
> > +static const struct of_device_id ebla_spics_of_match[] = {
> > + { .compatible = "pensando,elba-spics" },
>
> Have you documented this?

Yes in Documentation/devicetree/bindings, I'll double check
the content for completeness. The SPI CS isn't used for
something else, the integrated DesignWare IP doesn't
support 4 chip-selects on two spi busses.

>
> Other than that this is a nice and complete driver.
>
> Yours,
> Linus Walleij

Thanks for the review!

\
 
 \ /
  Last update: 2021-03-30 04:47    [W:0.194 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site