lkml.org 
[lkml]   [2021]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] sata_mv: add IRQ checks
Date
The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...

Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).

Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>

---
drivers/ata/sata_mv.c | 4 ++++
1 file changed, 4 insertions(+)

Index: linux-block/drivers/ata/sata_mv.c
===================================================================
--- linux-block.orig/drivers/ata/sata_mv.c
+++ linux-block/drivers/ata/sata_mv.c
@@ -4097,6 +4097,10 @@ static int mv_platform_probe(struct plat
n_ports = mv_platform_data->n_ports;
irq = platform_get_irq(pdev, 0);
}
+ if (irq < 0)
+ return irq;
+ if (!irq)
+ return -EINVAL;

host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
\
 
 \ /
  Last update: 2021-03-27 22:24    [W:0.033 / U:3.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site