lkml.org 
[lkml]   [2021]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] dt-binding: leds: Document leds-multi-gpio bindings
Date
From: Hermes Zhang <chenhuiz@axis.com>

Document the device tree bindings of the multiple GPIOs LED driver
Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml.

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
---

Notes:
Add maxItems

.../bindings/leds/leds-multi-gpio.yaml | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml

diff --git a/Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml
new file mode 100644
index 000000000000..6f2b47487b90
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-multi-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multiple GPIOs LED driver
+
+maintainers:
+ - Hermes Zhang <chenhuiz@axis.com>
+
+description:
+ This will support some LED made of multiple GPIOs and the brightness of the
+ LED could map to different states of the GPIOs.
+
+properties:
+ compatible:
+ const: multi-gpio-led
+
+ led-gpios:
+ description: Array of one or more GPIOs pins used to control the LED.
+ minItems: 1
+ maxItems: 8 # Should be enough
+
+ led-states:
+ description: |
+ The array list the supported states here which will map to brightness
+ from 0 to maximum. Each item in the array will present all the GPIOs
+ value by bit.
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 16 # Should be enough
+
+required:
+ - compatible
+ - led-gpios
+ - led-states
+
+additionalProperties: false
+
+examples:
+ - |
+ gpios-led {
+ compatible = "multi-gpio-led";
+
+ led-gpios = <&gpio0 23 0x1>,
+ <&gpio0 24 0x1>;
+ led-states = /bits/ 8 <0x00 0x01 0x02 0x03>;
+ };
+...
--
2.20.1
\
 
 \ /
  Last update: 2021-03-24 03:50    [W:0.078 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site