lkml.org 
[lkml]   [2021]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/2] mfd: sy7636a: Initial commit
Date
Initial support for the Silergy SY7636A Power Management chip.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
v3:
- Address comments in V2
- Drop regulator patches

drivers/mfd/Kconfig | 10 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/sy7636a.c | 246 ++++++++++++++++++++++++++++++++++++
include/linux/mfd/sy7636a.h | 46 +++++++
4 files changed, 303 insertions(+)
create mode 100644 drivers/mfd/sy7636a.c
create mode 100644 include/linux/mfd/sy7636a.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b74efa469e90..a285d11d5be3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1351,6 +1351,16 @@ config MFD_SYSCON
Select this option to enable accessing system control registers
via regmap.

+config MFD_SY7636A
+ tristate "Silergy SY7636A Power Management chip"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y
+ help
+ Select this option to enable support for the Silergy SY7636A
+ Power Management chip.
+
config MFD_DAVINCI_VOICECODEC
tristate
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 834f5463af28..5bfa0d6e5dc5 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -265,6 +265,7 @@ obj-$(CONFIG_MFD_STMFX) += stmfx.o
obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o

+obj-$(CONFIG_MFD_SY7636A) += sy7636a.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
diff --git a/drivers/mfd/sy7636a.c b/drivers/mfd/sy7636a.c
new file mode 100644
index 000000000000..ecb7c58eb5f4
--- /dev/null
+++ b/drivers/mfd/sy7636a.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// MFD parent driver for SY7636A chip
+//
+// Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+//
+// Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+// Alistair Francis <alistair@alistair23.me>
+//
+// Based on the lp87565 driver by Keerthy <j-keerthy@ti.com>
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static const struct regmap_config sy7636a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const struct mfd_cell sy7636a_cells[] = {
+ { .name = "sy7636a-regulator", },
+ { .name = "sy7636a-temperature", },
+ { .name = "sy7636a-thermal", },
+};
+
+static const struct of_device_id of_sy7636a_match_table[] = {
+ { .compatible = "silergy,sy7636a", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_sy7636a_match_table);
+
+static const char * const states[] = {
+ "no fault event",
+ "UVP at VP rail",
+ "UVP at VN rail",
+ "UVP at VPOS rail",
+ "UVP at VNEG rail",
+ "UVP at VDDH rail",
+ "UVP at VEE rail",
+ "SCP at VP rail",
+ "SCP at VN rail",
+ "SCP at VPOS rail",
+ "SCP at VNEG rail",
+ "SCP at VDDH rail",
+ "SCP at VEE rail",
+ "SCP at V COM rail",
+ "UVLO",
+ "Thermal shutdown",
+};
+
+static int sy7636a_get_vcom_voltage_mv(struct regmap *regmap)
+{
+ int ret;
+ unsigned int val, val_h;
+
+ ret = regmap_read(regmap, SY7636A_REG_VCOM_ADJUST_CTRL_L, &val);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(regmap, SY7636A_REG_VCOM_ADJUST_CTRL_H, &val_h);
+ if (ret)
+ return ret;
+
+ val |= (val_h << VCOM_ADJUST_CTRL_SHIFT);
+
+ return (val & VCOM_ADJUST_CTRL_MASK) * VCOM_ADJUST_CTRL_SCAL;
+}
+
+static int sy7636a_set_vcom_voltage_mv(struct regmap *regmap, unsigned int vcom)
+{
+ int ret;
+ unsigned int val;
+
+ if (vcom < VCOM_MIN || vcom > VCOM_MAX)
+ return -EINVAL;
+
+ val = (unsigned int)(vcom / VCOM_ADJUST_CTRL_SCAL) & VCOM_ADJUST_CTRL_MASK;
+
+ ret = regmap_write(regmap, SY7636A_REG_VCOM_ADJUST_CTRL_L, val);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, SY7636A_REG_VCOM_ADJUST_CTRL_H, val >> VCOM_ADJUST_CTRL_SHIFT);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static ssize_t state_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ unsigned int val;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev);
+
+ ret = regmap_read(sy7636a->regmap, SY7636A_REG_FAULT_FLAG, &val);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to read from device\n");
+ return ret;
+ }
+
+ val = val >> FAULT_FLAG_SHIFT;
+
+ if (val >= ARRAY_SIZE(states)) {
+ dev_err(sy7636a->dev, "Unexpected value read from device: %u\n", val);
+ return -EINVAL;
+ }
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", states[val]);
+}
+static DEVICE_ATTR(state, 0444, state_show, NULL);
+
+static ssize_t power_good_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ unsigned int val;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev);
+
+ ret = regmap_read(sy7636a->regmap, SY7636A_REG_FAULT_FLAG, &val);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to read from device\n");
+ return ret;
+ }
+
+ val &= (1 << FAULT_FLAG_SHIFT) - 1;
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", val ? "ON" : "OFF");
+}
+static DEVICE_ATTR(power_good, 0444, power_good_show, NULL);
+
+static ssize_t vcom_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev);
+
+ ret = sy7636a_get_vcom_voltage_mv(sy7636a->regmap);
+ if (ret < 0)
+ return ret;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", -ret);
+}
+static ssize_t vcom_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int vcom;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev);
+
+ ret = kstrtoint(buf, 0, &vcom);
+ if (ret)
+ return ret;
+
+ if (vcom > 0 || vcom < -5000)
+ return -EINVAL;
+
+ ret = sy7636a_set_vcom_voltage_mv(sy7636a->regmap, (unsigned int)(-vcom));
+ if (ret)
+ return ret;
+
+ return count;
+}
+static DEVICE_ATTR(vcom, 0644, vcom_show, vcom_store);
+
+static struct attribute *sy7636a_sysfs_attrs[] = {
+ &dev_attr_state.attr,
+ &dev_attr_power_good.attr,
+ &dev_attr_vcom.attr,
+ NULL,
+};
+
+static const struct attribute_group sy7636a_sysfs_attr_group = {
+ .attrs = sy7636a_sysfs_attrs,
+};
+
+static int sy7636a_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct sy7636a *sy7636a;
+ int ret;
+
+ sy7636a = devm_kzalloc(&client->dev, sizeof(*sy7636a), GFP_KERNEL);
+ if (!sy7636a)
+ return -ENOMEM;
+
+ sy7636a->dev = &client->dev;
+
+ sy7636a->regmap = devm_regmap_init_i2c(client, &sy7636a_regmap_config);
+ if (IS_ERR(sy7636a->regmap)) {
+ ret = PTR_ERR(sy7636a->regmap);
+ dev_err(sy7636a->dev,
+ "Failed to initialize register map: %d\n", ret);
+ return ret;
+ }
+
+ i2c_set_clientdata(client, sy7636a);
+
+ ret = sysfs_create_group(&client->dev.kobj, &sy7636a_sysfs_attr_group);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to create sysfs attributes\n");
+ return ret;
+ }
+
+ ret = devm_mfd_add_devices(sy7636a->dev, PLATFORM_DEVID_AUTO,
+ sy7636a_cells, ARRAY_SIZE(sy7636a_cells),
+ NULL, 0, NULL);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to add child devices\n");
+ sysfs_remove_group(&client->dev.kobj, &sy7636a_sysfs_attr_group);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id sy7636a_id_table[] = {
+ { "sy7636a", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, sy7636a_id_table);
+
+static struct i2c_driver sy7636a_driver = {
+ .driver = {
+ .name = "sy7636a",
+ .of_match_table = of_sy7636a_match_table,
+ },
+ .probe = sy7636a_probe,
+ .id_table = sy7636a_id_table,
+};
+module_i2c_driver(sy7636a_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>");
+MODULE_DESCRIPTION("Silergy SY7636A Multi-Function Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/sy7636a.h b/include/linux/mfd/sy7636a.h
new file mode 100644
index 000000000000..a5ec5d911b3a
--- /dev/null
+++ b/include/linux/mfd/sy7636a.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Functions to access SY3686A power management chip.
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ */
+
+#ifndef __MFD_SY7636A_H
+#define __MFD_SY7636A_H
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define SY7636A_REG_OPERATION_MODE_CRL 0x00
+#define SY7636A_OPERATION_MODE_CRL_VCOMCTL BIT(6)
+#define SY7636A_OPERATION_MODE_CRL_ONOFF BIT(7)
+#define SY7636A_REG_VCOM_ADJUST_CTRL_L 0x01
+#define SY7636A_REG_VCOM_ADJUST_CTRL_H 0x02
+#define SY7636A_REG_VCOM_ADJUST_CTRL_MASK 0x01ff
+#define SY7636A_REG_VLDO_VOLTAGE_ADJULST_CTRL 0x03
+#define SY7636A_REG_POWER_ON_DELAY_TIME 0x06
+#define SY7636A_REG_FAULT_FLAG 0x07
+#define SY7636A_FAULT_FLAG_PG BIT(0)
+#define SY7636A_REG_TERMISTOR_READOUT 0x08
+
+#define SY7636A_REG_MAX 0x08
+
+#define VCOM_MIN 0
+#define VCOM_MAX 5000
+
+#define VCOM_ADJUST_CTRL_MASK 0x1ff
+// Used to shift the high byte
+#define VCOM_ADJUST_CTRL_SHIFT 8
+// Used to scale from VCOM_ADJUST_CTRL to mv
+#define VCOM_ADJUST_CTRL_SCAL 10
+
+#define FAULT_FLAG_SHIFT 1
+
+struct sy7636a {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+#endif /* __LINUX_MFD_SY7636A_H */
--
2.30.1
\
 
 \ /
  Last update: 2021-03-21 15:15    [W:0.041 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site