lkml.org 
[lkml]   [2021]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] bus: mhi: core: Remove pre_init flag used for power purposes
Date
Some controllers can choose to skip preparation for power up.
In that case, device context is initialized based on the pre_init
flag not being set during mhi_prepare_for_power_up(). There is no
reason MHI host driver should maintain and provide controllers
with two separate paths for preparing MHI.

Going forward, all controllers will be required to call the
mhi_prepare_for_power_up() API followed by their choice of sync
or async power up. This allows MHI host driver to get rid of the
pre_init flag and sets up a common way for all controllers to use
MHI. This also helps controllers fail early on during preparation
phase in some failure cases.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
drivers/bus/mhi/core/init.c | 3 ---
drivers/bus/mhi/core/pm.c | 20 --------------------
include/linux/mhi.h | 2 --
3 files changed, 25 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 33323ad..59ff832 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -1080,8 +1080,6 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
mhi_rddm_prepare(mhi_cntrl, mhi_cntrl->rddm_image);
}

- mhi_cntrl->pre_init = true;
-
mutex_unlock(&mhi_cntrl->pm_mutex);

return 0;
@@ -1112,7 +1110,6 @@ void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl)
}

mhi_deinit_dev_ctxt(mhi_cntrl);
- mhi_cntrl->pre_init = false;
}
EXPORT_SYMBOL_GPL(mhi_unprepare_after_power_down);

diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 681960c..fa5454d 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -1033,13 +1033,6 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
mutex_lock(&mhi_cntrl->pm_mutex);
mhi_cntrl->pm_state = MHI_PM_DISABLE;

- if (!mhi_cntrl->pre_init) {
- /* Setup device context */
- ret = mhi_init_dev_ctxt(mhi_cntrl);
- if (ret)
- goto error_dev_ctxt;
- }
-
ret = mhi_init_irq_setup(mhi_cntrl);
if (ret)
goto error_setup_irq;
@@ -1121,10 +1114,6 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
mhi_deinit_free_irq(mhi_cntrl);

error_setup_irq:
- if (!mhi_cntrl->pre_init)
- mhi_deinit_dev_ctxt(mhi_cntrl);
-
-error_dev_ctxt:
mutex_unlock(&mhi_cntrl->pm_mutex);

return ret;
@@ -1166,15 +1155,6 @@ void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
flush_work(&mhi_cntrl->st_worker);

free_irq(mhi_cntrl->irq[0], mhi_cntrl);
-
- if (!mhi_cntrl->pre_init) {
- /* Free all allocated resources */
- if (mhi_cntrl->fbc_image) {
- mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->fbc_image);
- mhi_cntrl->fbc_image = NULL;
- }
- mhi_deinit_dev_ctxt(mhi_cntrl);
- }
}
EXPORT_SYMBOL_GPL(mhi_power_down);

diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index d26acc8..a401271 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -352,7 +352,6 @@ struct mhi_controller_config {
* @index: Index of the MHI controller instance
* @bounce_buf: Use of bounce buffer
* @fbc_download: MHI host needs to do complete image transfer (optional)
- * @pre_init: MHI host needs to do pre-initialization before power up
* @wake_set: Device wakeup set flag
* @irq_flags: irq flags passed to request_irq (optional)
*
@@ -445,7 +444,6 @@ struct mhi_controller {
int index;
bool bounce_buf;
bool fbc_download;
- bool pre_init;
bool wake_set;
unsigned long irq_flags;
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2021-03-03 04:11    [W:0.032 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site