lkml.org 
[lkml]   [2021]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 53/95] usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
Date
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit b1d25e6ee57c2605845595b6c61340d734253eb3 upstream.

According to the datasheet, this controller has a restriction
which "set an endpoint number so that combinations of the DIR bit and
the EPNUM bits do not overlap.". However, since the udc core driver is
possible to assign a bulk pipe as an interrupt endpoint, an endpoint
number may not match the pipe number. After that, when user rebinds
another gadget driver, this driver broke the restriction because
the driver didn't clear any configuration in usb_ep_disable().

Example:
# modprobe g_ncm
Then, EP3 = pipe 3, EP4 = pipe 4, EP5 = pipe 6
# rmmod g_ncm
# modprobe g_hid
Then, EP3 = pipe 6, EP4 = pipe 7.
So, pipe 3 and pipe 6 are set as EP3.

So, clear PIPECFG register in usbhs_pipe_free().

Fixes: dfb87b8bfe09 ("usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1615168538-26101-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/renesas_usbhs/pipe.c | 2 ++
1 file changed, 2 insertions(+)

--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -746,6 +746,8 @@ struct usbhs_pipe *usbhs_pipe_malloc(str

void usbhs_pipe_free(struct usbhs_pipe *pipe)
{
+ usbhsp_pipe_select(pipe);
+ usbhsp_pipe_cfg_set(pipe, 0xFFFF, 0);
usbhsp_put_pipe(pipe);
}


\
 
 \ /
  Last update: 2021-03-15 15:21    [W:0.325 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site