lkml.org 
[lkml]   [2021]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies
Date
anx7625 requires 3 power supply regulators.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
---
v3->v4: rebase to drm-misc/for-linux-next
---
.../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index c789784efe306..ab48ab2f4240d 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -34,6 +34,15 @@ properties:
description: used for reset chip control, RESET_N pin B7.
maxItems: 1

+ vdd10-supply:
+ description: Regulator that provides the supply 1.0V power.
+
+ vdd18-supply:
+ description: Regulator that provides the supply 1.8V power.
+
+ vdd33-supply:
+ description: Regulator that provides the supply 3.3V power.
+
ports:
$ref: /schemas/graph.yaml#/properties/ports

@@ -55,6 +64,9 @@ properties:
required:
- compatible
- reg
+ - vdd10-supply
+ - vdd18-supply
+ - vdd33-supply
- ports

additionalProperties: false
@@ -72,6 +84,9 @@ examples:
reg = <0x58>;
enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&pp1000_mipibrdg>;
+ vdd18-supply = <&pp1800_mipibrdg>;
+ vdd33-supply = <&pp3300_mipibrdg>;

ports {
#address-cells = <1>;
--
2.30.1.766.gb4fecdf3b7-goog
\
 
 \ /
  Last update: 2021-02-24 07:18    [W:0.047 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site