lkml.org 
[lkml]   [2021]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP
From
Date
Hi Robert,

Thank you for your patch!

Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>

Thanks,
Andrey

On 17.02.2021 14:21, Robert Foss wrote:
> Enable camss & ov8856 DT nodes.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>
> Changes since v1
> - Laurent: Fix subject
> - Laurent: Remove redundant regulator labels
> - Laurent: Remove empty line
>
> Changes since v3
> - Fixed ordering of IRQs
> - Add newlines for better readability
>
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 5842ab65789c..d89286f6aacb 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1108,6 +1108,21 @@ &cci {
>
> &camss {
> vdda-supply = <&vreg_l1a_0p875>;
> +
> + status = "ok";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + csiphy0_ep: endpoint {
> + clock-lanes = <1>;
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&ov8856_ep>;
> + };
> + };
> + };
> };
>
> &cci_i2c0 {
> @@ -1139,7 +1154,7 @@ camera@10 {
> avdd-supply = <&cam0_avdd_2v8>;
> dvdd-supply = <&cam0_dvdd_1v2>;
>
> - status = "disable";
> + status = "ok";
>
> port {
> ov8856_ep: endpoint {
> @@ -1147,7 +1162,7 @@ ov8856_ep: endpoint {
> link-frequencies = /bits/ 64
> <360000000 180000000>;
> data-lanes = <1 2 3 4>;
> -// remote-endpoint = <&csiphy0_ep>;
> + remote-endpoint = <&csiphy0_ep>;
> };
> };
> };
>

\
 
 \ /
  Last update: 2021-02-21 19:44    [W:0.292 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site