lkml.org 
[lkml]   [2021]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v5 19/22] media: dt-bindings: media: Remove qcom,camss documentation
    Date
    This documentation has been incorporated in dtschema dt-bindings
    for the devices supported by CAMSS and is no longer helpful.

    Signed-off-by: Robert Foss <robert.foss@linaro.org>
    Reviewed-by: Rob Herring <robh@kernel.org>
    ---
    .../devicetree/bindings/media/qcom,camss.txt | 236 ------------------
    1 file changed, 236 deletions(-)
    delete mode 100644 Documentation/devicetree/bindings/media/qcom,camss.txt

    diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
    deleted file mode 100644
    index 498234629e21..000000000000
    --- a/Documentation/devicetree/bindings/media/qcom,camss.txt
    +++ /dev/null
    @@ -1,236 +0,0 @@
    -Qualcomm Camera Subsystem
    -
    -* Properties
    -
    -- compatible:
    - Usage: required
    - Value type: <stringlist>
    - Definition: Should contain one of:
    - - "qcom,msm8916-camss"
    - - "qcom,msm8996-camss"
    - - "qcom,sdm660-camss"
    -- reg:
    - Usage: required
    - Value type: <prop-encoded-array>
    - Definition: Register ranges as listed in the reg-names property.
    -- reg-names:
    - Usage: required
    - Value type: <stringlist>
    - Definition: Should contain the following entries:
    - - "csiphy0"
    - - "csiphy0_clk_mux"
    - - "csiphy1"
    - - "csiphy1_clk_mux"
    - - "csiphy2" (8996 only)
    - - "csiphy2_clk_mux" (8996 only)
    - - "csid0"
    - - "csid1"
    - - "csid2" (8996 only)
    - - "csid3" (8996 only)
    - - "ispif"
    - - "csi_clk_mux"
    - - "vfe0"
    - - "vfe1" (8996 only)
    -- interrupts:
    - Usage: required
    - Value type: <prop-encoded-array>
    - Definition: Interrupts as listed in the interrupt-names property.
    -- interrupt-names:
    - Usage: required
    - Value type: <stringlist>
    - Definition: Should contain the following entries:
    - - "csiphy0"
    - - "csiphy1"
    - - "csiphy2" (8996 only)
    - - "csid0"
    - - "csid1"
    - - "csid2" (8996 only)
    - - "csid3" (8996 only)
    - - "ispif"
    - - "vfe0"
    - - "vfe1" (8996 only)
    -- power-domains:
    - Usage: required
    - Value type: <prop-encoded-array>
    - Definition: A phandle and power domain specifier pairs to the
    - power domain which is responsible for collapsing
    - and restoring power to the peripheral.
    -- clocks:
    - Usage: required
    - Value type: <prop-encoded-array>
    - Definition: A list of phandle and clock specifier pairs as listed
    - in clock-names property.
    -- clock-names:
    - Usage: required
    - Value type: <stringlist>
    - Definition: Should contain the following entries:
    - - "top_ahb"
    - - "throttle_axi" (660 only)
    - - "ispif_ahb"
    - - "csiphy0_timer"
    - - "csiphy1_timer"
    - - "csiphy2_timer" (8996 only)
    - - "csiphy_ahb2crif" (660 only)
    - - "csi0_ahb"
    - - "csi0"
    - - "csi0_phy"
    - - "csi0_pix"
    - - "csi0_rdi"
    - - "cphy_csid0" (660 only)
    - - "csi1_ahb"
    - - "csi1"
    - - "csi1_phy"
    - - "csi1_pix"
    - - "csi1_rdi"
    - - "cphy_csid1" (660 only)
    - - "csi2_ahb" (8996 only)
    - - "csi2" (8996 only)
    - - "csi2_phy" (8996 only)
    - - "csi2_pix" (8996 only)
    - - "csi2_rdi" (8996 only)
    - - "cphy_csid2" (660 only)
    - - "csi3_ahb" (8996 only)
    - - "csi3" (8996 only)
    - - "csi3_phy" (8996 only)
    - - "csi3_pix" (8996 only)
    - - "csi3_rdi" (8996 only)
    - - "cphy_csid3" (660 only)
    - - "ahb"
    - - "vfe0"
    - - "csi_vfe0"
    - - "vfe0_ahb", (8996 only)
    - - "vfe0_stream", (8996 only)
    - - "vfe1", (8996 only)
    - - "csi_vfe1", (8996 only)
    - - "vfe1_ahb", (8996 only)
    - - "vfe1_stream", (8996 only)
    - - "vfe_ahb"
    - - "vfe_axi"
    -- vdda-supply:
    - Usage: required
    - Value type: <phandle>
    - Definition: A phandle to voltage supply for CSI2.
    -- iommus:
    - Usage: required
    - Value type: <prop-encoded-array>
    - Definition: A list of phandle and IOMMU specifier pairs.
    -
    -* Nodes
    -
    -- ports:
    - Usage: required
    - Definition: As described in video-interfaces.txt in same directory.
    - Properties:
    - - reg:
    - Usage: required
    - Value type: <u32>
    - Definition: Selects CSI2 PHY interface - PHY0, PHY1
    - or PHY2 (8996 only)
    - Endpoint node properties:
    - - clock-lanes:
    - Usage: required
    - Value type: <u32>
    - Definition: The physical clock lane index. On 8916
    - the value must always be <1> as the physical
    - clock lane is lane 1. On 8996 the value must
    - always be <7> as the hardware supports D-PHY
    - and C-PHY, indexes are in a common set and
    - D-PHY physical clock lane is labeled as 7.
    - - data-lanes:
    - Usage: required
    - Value type: <prop-encoded-array>
    - Definition: An array of physical data lanes indexes.
    - Position of an entry determines the logical
    - lane number, while the value of an entry
    - indicates physical lane index. Lane swapping
    - is supported. Physical lane indexes for
    - 8916: 0, 2, 3, 4; for 8996: 0, 1, 2, 3.
    -
    -* An Example
    -
    - camss: camss@1b00000 {
    - compatible = "qcom,msm8916-camss";
    - reg = <0x1b0ac00 0x200>,
    - <0x1b00030 0x4>,
    - <0x1b0b000 0x200>,
    - <0x1b00038 0x4>,
    - <0x1b08000 0x100>,
    - <0x1b08400 0x100>,
    - <0x1b0a000 0x500>,
    - <0x1b00020 0x10>,
    - <0x1b10000 0x1000>;
    - reg-names = "csiphy0",
    - "csiphy0_clk_mux",
    - "csiphy1",
    - "csiphy1_clk_mux",
    - "csid0",
    - "csid1",
    - "ispif",
    - "csi_clk_mux",
    - "vfe0";
    - interrupts = <GIC_SPI 78 0>,
    - <GIC_SPI 79 0>,
    - <GIC_SPI 51 0>,
    - <GIC_SPI 52 0>,
    - <GIC_SPI 55 0>,
    - <GIC_SPI 57 0>;
    - interrupt-names = "csiphy0",
    - "csiphy1",
    - "csid0",
    - "csid1",
    - "ispif",
    - "vfe0";
    - power-domains = <&gcc VFE_GDSC>;
    - clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
    - <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
    - <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
    - <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
    - <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
    - <&gcc GCC_CAMSS_CSI0_CLK>,
    - <&gcc GCC_CAMSS_CSI0PHY_CLK>,
    - <&gcc GCC_CAMSS_CSI0PIX_CLK>,
    - <&gcc GCC_CAMSS_CSI0RDI_CLK>,
    - <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
    - <&gcc GCC_CAMSS_CSI1_CLK>,
    - <&gcc GCC_CAMSS_CSI1PHY_CLK>,
    - <&gcc GCC_CAMSS_CSI1PIX_CLK>,
    - <&gcc GCC_CAMSS_CSI1RDI_CLK>,
    - <&gcc GCC_CAMSS_AHB_CLK>,
    - <&gcc GCC_CAMSS_VFE0_CLK>,
    - <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
    - <&gcc GCC_CAMSS_VFE_AHB_CLK>,
    - <&gcc GCC_CAMSS_VFE_AXI_CLK>;
    - clock-names = "top_ahb",
    - "ispif_ahb",
    - "csiphy0_timer",
    - "csiphy1_timer",
    - "csi0_ahb",
    - "csi0",
    - "csi0_phy",
    - "csi0_pix",
    - "csi0_rdi",
    - "csi1_ahb",
    - "csi1",
    - "csi1_phy",
    - "csi1_pix",
    - "csi1_rdi",
    - "ahb",
    - "vfe0",
    - "csi_vfe0",
    - "vfe_ahb",
    - "vfe_axi";
    - vdda-supply = <&pm8916_l2>;
    - iommus = <&apps_iommu 3>;
    - ports {
    - #address-cells = <1>;
    - #size-cells = <0>;
    - port@0 {
    - reg = <0>;
    - csiphy0_ep: endpoint {
    - clock-lanes = <1>;
    - data-lanes = <0 2>;
    - remote-endpoint = <&ov5645_ep>;
    - };
    - };
    - };
    - };
    --
    2.27.0
    \
     
     \ /
      Last update: 2021-02-17 12:41    [W:4.188 / U:0.000 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site