lkml.org 
[lkml]   [2021]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v5 04/20] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ)
Hi,

On Thu, Jan 28, 2021 at 1:26 AM Andre Przywara <andre.przywara@arm.com> wrote:
>
> The AXP305 PMIC used in AXP805 seems to be fully compatible to the
^
This statement doesn't quite make sense. I assume you wanted to mention
a board or the H616 SoC here?

> AXP805 PMIC, so add the proper chain of compatible strings.
>
> Also at least on one board (Orangepi Zero2) there is no interrupt line
> connected to the CPU, so make the "interrupts" property optional.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index 4991a6415796..4fd748101e3c 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -26,10 +26,10 @@ Required properties:
> * "x-powers,axp803"
> * "x-powers,axp806"
> * "x-powers,axp805", "x-powers,axp806"
> + * "x-powers,axp803", "x-powers,axp805", "x-powers,axp806"

axp305? axp803 is used with A64 IIRC.

ChenYu

> * "x-powers,axp809"
> * "x-powers,axp813"
> - reg: The I2C slave address or RSB hardware address for the AXP chip
> -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
> - interrupt-controller: The PMIC has its own internal IRQs
> - #interrupt-cells: Should be set to 1
>
> @@ -43,6 +43,7 @@ more information:
> AXP20x/LDO3: software-based implementation
>
> Optional properties:
> +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
> - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
> AXP152/20X: range: 750-1875, Default: 1.5 MHz
> AXP22X/8XX: range: 1800-4050, Default: 3 MHz
> --
> 2.17.5
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20210127172500.13356-5-andre.przywara%40arm.com.

\
 
 \ /
  Last update: 2021-02-02 09:00    [W:0.146 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site