Messages in this thread | | | From | Daniel Lezcano <> | Subject | [GIT PULL] thermal for v5.12-rc1 | Date | Fri, 19 Feb 2021 12:54:53 +0100 |
| |
Hi Linus,
please consider pulling these thermal changes for v5.12-rc1
Note a set of changes for the qcom adc driver rely on an immutable branch from the iio tree: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/log/?h=ib-iio-thermal-5.11-rc1
The following changes since commit e71ba9452f0b5b2e8dc8aa5445198cd9214a6a62:
Linux 5.11-rc2 (2021-01-03 15:55:30 -0800)
are available in the Git repository at:
ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git tags/thermal-v5.12-rc1
for you to fetch changes up to a51afb13311cd85b2f638c691b2734622277d8f5:
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error (2021-02-17 18:53:19 +0100)
---------------------------------------------------------------- - Use the newly introduced 'hot' and 'critical' ops for the acpi thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro (Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing them again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel Lezcano)
- Use the critical and hot ops to prevent an unexpected system shutdown on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem (Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power allocator governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom platforms. Please note those changes rely on an immutable branch: iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree (Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
---------------------------------------------------------------- Arnd Bergmann (2): thermal/drivers/tango: Remove tango driver thermal/drivers/zx: Remove zx driver
Colin Ian King (1): thermal: qcom: Fix comparison with uninitialized variable channels_available
Craig Tatlor (1): fixp-arith: add a linear interpolation function
Daniel Lezcano (14): thermal/drivers/acpi: Use hot and critical ops thermal/core: Remove notify ops thermal/core: Remove the 'forced_passive' option thermal/core: Remove unused functions rebind/unbind exception thermal/core: Remove pointless test with the THERMAL_TRIPS_NONE macro acpi/drivers/thermal: Remove TRIPS_NONE cooling device binding thermal/core: Remove THERMAL_TRIPS_NONE test thermal/core: Remove unused macro THERMAL_TRIPS_NONE thermal/core: Precompute the delays from msecs to jiffies thermal/core: Use precomputed jiffies for the polling thermal/core: Remove ms based delay fields thermal/core: Remove pointless thermal_zone_device_reset() function thermal/core: Make cooling device state change private Merge remote-tracking branch 'iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1' into testing
Dmitry Baryshkov (11): iio: adc: qcom-vadc: move several adc5 functions to common file iio: adc: qcom-vadc-common: use fixp_linear_interpolate iio: adc: move qcom-vadc-common.h to include dir iio: adc: qcom-spmi-adc5: use of_device_get_match_data iio: provide of_iio_channel_get_by_name() and devm_ version it iio: adc: move vadc_map_pt from header to the source file iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb dt-bindings: thermal: qcom: add adc-thermal monitor bindings thermal: qcom: add support for adc-tm5 PMIC thermal monitor
Kai-Heng Feng (2): thermal: int340x: Fix unexpected shutdown at critical temperature thermal: intel: pch: Fix unexpected shutdown at critical temperature
Lukasz Luba (1): thermal: power allocator: fail binding for non-power actor devices
Tony Lindgren (4): thermal: ti-soc-thermal: Skip pointless register access for dra7 thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430 thermal: ti-soc-thermal: Simplify polling with iopoll thermal: ti-soc-thermal: Use non-inverted define for omap4
Viresh Kumar (1): thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
.../bindings/thermal/qcom-spmi-adc-tm5.yaml | 153 +++++ .../devicetree/bindings/thermal/tango-thermal.txt | 17 - .../devicetree/bindings/thermal/zx2967-thermal.txt | 116 ---- Documentation/driver-api/thermal/sysfs-api.rst | 13 - drivers/acpi/thermal.c | 49 +- drivers/hwmon/pwm-fan.c | 1 - drivers/iio/adc/qcom-pm8xxx-xoadc.c | 3 +- drivers/iio/adc/qcom-spmi-adc5.c | 95 +--- drivers/iio/adc/qcom-spmi-vadc.c | 3 +- drivers/iio/adc/qcom-vadc-common.c | 279 +++++---- drivers/iio/inkern.c | 34 +- drivers/platform/x86/acerhdf.c | 3 +- drivers/thermal/Kconfig | 17 - drivers/thermal/Makefile | 2 - drivers/thermal/cpufreq_cooling.c | 2 +- drivers/thermal/da9062-thermal.c | 4 +- drivers/thermal/gov_power_allocator.c | 37 +- drivers/thermal/gov_step_wise.c | 14 +- .../intel/int340x_thermal/int340x_thermal_zone.c | 6 + drivers/thermal/intel/intel_pch_thermal.c | 6 + drivers/thermal/khadas_mcu_fan.c | 1 - drivers/thermal/qcom/Kconfig | 11 + drivers/thermal/qcom/Makefile | 1 + drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 623 +++++++++++++++++++++ drivers/thermal/tango_thermal.c | 126 ----- drivers/thermal/thermal_core.c | 72 +-- drivers/thermal/thermal_core.h | 7 +- drivers/thermal/thermal_helpers.c | 7 + drivers/thermal/thermal_sysfs.c | 85 +-- .../thermal/ti-soc-thermal/omap4-thermal-data.c | 7 +- drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h | 4 +- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 54 +- drivers/thermal/ti-soc-thermal/ti-bandgap.h | 2 + drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 +- drivers/thermal/zx2967_thermal.c | 256 --------- include/linux/fixp-arith.h | 19 + .../linux}/iio/adc/qcom-vadc-common.h | 31 +- include/linux/iio/consumer.h | 36 ++ include/linux/thermal.h | 18 +- 39 files changed, 1218 insertions(+), 1002 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml delete mode 100644 Documentation/devicetree/bindings/thermal/tango-thermal.txt delete mode 100644 Documentation/devicetree/bindings/thermal/zx2967-thermal.txt create mode 100644 drivers/thermal/qcom/qcom-spmi-adc-tm5.c delete mode 100644 drivers/thermal/tango_thermal.c delete mode 100644 drivers/thermal/zx2967_thermal.c rename {drivers => include/linux}/iio/adc/qcom-vadc-common.h (92%)
-- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
| |