lkml.org 
[lkml]   [2021]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 2/2] ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
Date
From: Vincent Cheng <vincent.cheng.xh@renesas.com>

When enabling output using PTP_CLK_REQ_PEROUT, need to align the output
clock to the internal 1 PPS clock.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
---
drivers/ptp/ptp_clockmatrix.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/ptp/ptp_clockmatrix.c b/drivers/ptp/ptp_clockmatrix.c
index 1918de5..ebe540e 100644
--- a/drivers/ptp/ptp_clockmatrix.c
+++ b/drivers/ptp/ptp_clockmatrix.c
@@ -1401,13 +1401,23 @@ static int idtcm_perout_enable(struct idtcm_channel *channel,
bool enable,
struct ptp_perout_request *perout)
{
+ struct idtcm *idtcm = channel->idtcm;
unsigned int flags = perout->flags;
+ struct timespec64 ts = {0, 0};
+ int err;

if (flags == PEROUT_ENABLE_OUTPUT_MASK)
- return idtcm_output_mask_enable(channel, enable);
+ err = idtcm_output_mask_enable(channel, enable);
+ else
+ err = idtcm_output_enable(channel, enable, perout->index);
+
+ if (err) {
+ dev_err(&idtcm->client->dev, "Unable to set output enable");
+ return err;
+ }

- /* Enable/disable individual output instead */
- return idtcm_output_enable(channel, enable, perout->index);
+ /* Align output to internal 1 PPS */
+ return _idtcm_settime(channel, &ts, SCSR_TOD_WR_TYPE_SEL_DELTA_PLUS);
}

static int idtcm_get_pll_mode(struct idtcm_channel *channel,
--
2.7.4
\
 
 \ /
  Last update: 2022-09-17 16:09    [W:0.092 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site