lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 net-next 0/4] Add support for Qualcomm QCA807x PHYs
Date
This patch series adds support for Qualcomm QCA807x PHYs.

These are really common companion PHYs on boards featuring
Qualcomm IPQ40xx, IPQ60xx and IPQ807x SoCs.

They are 2 or 5 port IEEE 802.3 clause 22 compliant
10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s.

They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC,
while second one is SGMII for connection to MAC or fiber.

Both models have a combo port that supports 1000BASE-X and 100BASE-FX
fiber.

Each PHY inside of QCA807x series has 2 digitally controlled output only
pins that natively drive LED-s.
But some vendors used these to driver generic LED-s controlled by
user space, so lets enable registering each PHY as GPIO controller and
add driver for it.

Robert Marko (4):
dt-bindings: net: Add QCA807x PHY
dt-bindings: net: Add bindings for Qualcomm QCA807x
net: phy: Add Qualcomm QCA807x driver
MAINTAINERS: Add entry for Qualcomm QCA807x PHY driver

.../devicetree/bindings/net/qcom,qca807x.yaml | 70 ++
MAINTAINERS | 9 +
drivers/net/phy/Kconfig | 10 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/qca807x.c | 855 ++++++++++++++++++
include/dt-bindings/net/qcom-qca807x.h | 30 +
6 files changed, 975 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/qcom,qca807x.yaml
create mode 100644 drivers/net/phy/qca807x.c
create mode 100644 include/dt-bindings/net/qcom-qca807x.h

--
2.29.2

\
 
 \ /
  Last update: 2021-02-10 13:59    [W:0.079 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site