lkml.org 
[lkml]   [2021]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 1/6] RISC-V: Avoid using per cpu array for ordered booting
Date
From: Atish Patra <atishp@rivosinc.com>

Currently both order booting and spinwait approach uses a per cpu
array to update stack & task pointer. This approach will not work for the
following cases.
1. If NR_CPUs are configured to be less than highest hart id.
2. A platform has sparse hartid.

This issue can be fixed for ordered booting as the booting cpu brings up
one cpu at a time using SBI HSM extension which has opaque parameter
that is unused until now.

Introduce a common secondary boot data structure that can store the stack
and task pointer. Secondary harts will use this data while booting up
to setup the sp & tp.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
---
arch/riscv/include/asm/cpu_ops_sbi.h | 28 ++++++++++++++++++++++++++++
arch/riscv/kernel/cpu_ops_sbi.c | 23 ++++++++++++++++++++---
arch/riscv/kernel/head.S | 19 ++++++++++---------
3 files changed, 58 insertions(+), 12 deletions(-)
create mode 100644 arch/riscv/include/asm/cpu_ops_sbi.h

diff --git a/arch/riscv/include/asm/cpu_ops_sbi.h b/arch/riscv/include/asm/cpu_ops_sbi.h
new file mode 100644
index 000000000000..ccb9a6d30486
--- /dev/null
+++ b/arch/riscv/include/asm/cpu_ops_sbi.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2021 by Rivos Inc.
+ */
+#ifndef __ASM_CPU_OPS_SBI_H
+#define __ASM_CPU_OPS_SBI_H
+
+#ifndef __ASSEMBLY__
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+
+/**
+ * struct sbi_hart_boot_data - Hart specific boot used during booting and
+ * cpu hotplug.
+ * @task_ptr: A pointer to the hart specific tp
+ * @stack_ptr: A pointer to the hart specific sp
+ */
+struct sbi_hart_boot_data {
+ void *task_ptr;
+ void *stack_ptr;
+};
+#endif
+
+#define SBI_HART_BOOT_TASK_PTR_OFFSET (0x00)
+#define SBI_HART_BOOT_STACK_PTR_OFFSET RISCV_SZPTR
+
+#endif /* ifndef __ASM_CPU_OPS_H */
diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
index 685fae72b7f5..2e7a9dd9c2a7 100644
--- a/arch/riscv/kernel/cpu_ops_sbi.c
+++ b/arch/riscv/kernel/cpu_ops_sbi.c
@@ -7,13 +7,22 @@

#include <linux/init.h>
#include <linux/mm.h>
+#include <linux/sched/task_stack.h>
#include <asm/cpu_ops.h>
+#include <asm/cpu_ops_sbi.h>
#include <asm/sbi.h>
#include <asm/smp.h>

extern char secondary_start_sbi[];
const struct cpu_operations cpu_ops_sbi;

+/*
+ * Ordered booting via HSM brings one cpu at a time. However, cpu hotplug can
+ * be invoked from multiple threads in paralle. Define a per cpu data
+ * to handle that.
+ */
+DEFINE_PER_CPU(struct sbi_hart_boot_data, boot_data);
+
static int sbi_hsm_hart_start(unsigned long hartid, unsigned long saddr,
unsigned long priv)
{
@@ -58,9 +67,17 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
int rc;
unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
int hartid = cpuid_to_hartid_map(cpuid);
-
- cpu_update_secondary_bootdata(cpuid, tidle);
- rc = sbi_hsm_hart_start(hartid, boot_addr, 0);
+ unsigned long hsm_data;
+ struct sbi_hart_boot_data *bdata = &per_cpu(boot_data, cpuid);
+
+ /* Make sure tidle is updated */
+ smp_mb();
+ bdata->task_ptr = tidle;
+ bdata->stack_ptr = task_stack_page(tidle) + THREAD_SIZE;
+ /* Make sure boot data is updated */
+ smp_mb();
+ hsm_data = __pa(bdata);
+ rc = sbi_hsm_hart_start(hartid, boot_addr, hsm_data);

return rc;
}
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index f52f01ecbeea..40d4c625513c 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -11,6 +11,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/csr.h>
+#include <asm/cpu_ops_sbi.h>
#include <asm/hwcap.h>
#include <asm/image.h>
#include "efi-header.S"
@@ -167,15 +168,15 @@ secondary_start_sbi:
la a3, .Lsecondary_park
csrw CSR_TVEC, a3

- slli a3, a0, LGREG
- la a4, __cpu_up_stack_pointer
- XIP_FIXUP_OFFSET a4
- la a5, __cpu_up_task_pointer
- XIP_FIXUP_OFFSET a5
- add a4, a3, a4
- add a5, a3, a5
- REG_L sp, (a4)
- REG_L tp, (a5)
+ /* a0 contains the hartid & a1 contains boot data */
+ li a2, SBI_HART_BOOT_TASK_PTR_OFFSET
+ XIP_FIXUP_OFFSET a2
+ add a2, a2, a1
+ REG_L tp, (a2)
+ li a3, SBI_HART_BOOT_STACK_PTR_OFFSET
+ XIP_FIXUP_OFFSET a3
+ add a3, a3, a1
+ REG_L sp, (a3)

.global secondary_start_common
secondary_start_common:
--
2.33.1
\
 
 \ /
  Last update: 2021-12-04 01:21    [W:0.146 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site