lkml.org 
[lkml]   [2021]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor
On Mon, Sep 6, 2021 at 5:29 AM Martin Kepplinger
<martin.kepplinger@puri.sm> wrote:
>
> Document the bindings used for the SK Hynix Hi-846 CMOS camera driver.
>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> .../bindings/media/i2c/hynix,hi846.yaml | 120 ++++++++++++++++++
> 1 file changed, 120 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> new file mode 100644
> index 000000000000..85a8877c2f38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
> +
> +maintainers:
> + - Martin Kepplinger <martin.kepplinger@puri.sm>
> +
> +description: |-
> + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
> + interface and CCI (I2C compatible) control bus. The output format
> + is raw Bayer.
> +
> +properties:
> + compatible:
> + const: hynix,hi846
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Reference to the mclk clock.
> +
> + assigned-clocks:
> + maxItems: 1
> +
> + assigned-clock-rates:
> + maxItems: 1
> +
> + reset-gpios:
> + description: Reference to the GPIO connected to the RESETB pin. Active low.
> + maxItems: 1
> +
> + shutdown-gpios:
> + description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
> + maxItems: 1
> +
> + vddio-supply:
> + description: Definition of the regulator used for the VDDIO power supply.
> +
> + vdda-supply:
> + description: Definition of the regulator used for the VDDA power supply.
> +
> + vddd-supply:
> + description: Definition of the regulator used for the VDDD power supply.
> +
> + port:
> + $ref: /schemas/graph.yaml#/properties/port

This needs to be:

$ref: /schemas/graph.yaml#/$defs/port-base

to fix the warning reported. You have to use the 'main' branch of
dtschema which has unevaluatedProperties support. I'll be making a
release soonish.

Rob

\
 
 \ /
  Last update: 2021-12-03 17:21    [W:0.383 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site