lkml.org 
[lkml]   [2021]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor
From
Date
Am Donnerstag, dem 25.11.2021 um 12:15 +0100 schrieb Geert
Uytterhoeven:
> On Mon, Sep 6, 2021 at 12:30 PM Martin Kepplinger
> <martin.kepplinger@puri.sm> wrote:
> > Document the bindings used for the SK Hynix Hi-846 CMOS camera
> > driver.
> >
> > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> >  .../bindings/media/i2c/hynix,hi846.yaml       | 120
> > ++++++++++++++++++
> >  1 file changed, 120 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > new file mode 100644
> > index 000000000000..85a8877c2f38
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > @@ -0,0 +1,120 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
> > +
> > +maintainers:
> > +  - Martin Kepplinger <martin.kepplinger@puri.sm>
> > +
> > +description: |-
> > +  The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
> > +  interface and CCI (I2C compatible) control bus. The output
> > format
> > +  is raw Bayer.
> > +
> > +properties:
> > +  compatible:
> > +    const: hynix,hi846
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Reference to the mclk clock.
> > +
> > +  assigned-clocks:
> > +    maxItems: 1
> > +
> > +  assigned-clock-rates:
> > +    maxItems: 1
> > +
> > +  reset-gpios:
> > +    description: Reference to the GPIO connected to the RESETB
> > pin. Active low.
> > +    maxItems: 1
> > +
> > +  shutdown-gpios:
> > +    description: Reference to the GPIO connected to the XSHUTDOWN
> > pin. Active low.
> > +    maxItems: 1
> > +
> > +  vddio-supply:
> > +    description: Definition of the regulator used for the VDDIO
> > power supply.
> > +
> > +  vdda-supply:
> > +    description: Definition of the regulator used for the VDDA
> > power supply.
> > +
> > +  vddd-supply:
> > +    description: Definition of the regulator used for the VDDD
> > power supply.
> > +
> > +  port:
> > +    $ref: /schemas/graph.yaml#/properties/port
> > +
> > +    properties:
> > +      endpoint:
> > +        $ref: /schemas/media/video-interfaces.yaml#
> > +        unevaluatedProperties: false
> > +
> > +        properties:
> > +          data-lanes:
> > +            oneOf:
> > +              - items:
> > +                  - const: 1
> > +                  - const: 2
> > +                  - const: 3
> > +                  - const: 4
> > +              - items:
> > +                  - const: 1
> > +                  - const: 2
> > +
> > +        required:
> > +          - data-lanes
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - assigned-clocks
> > +  - assigned-clock-rates
> > +  - vddio-supply
> > +  - vdda-supply
> > +  - vddd-supply
> > +  - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        hi846: camera@20 {
> > +            compatible = "hynix,hi846";
> > +            reg = <0x20>;
> > +            pinctrl-names = "default";
> > +            pinctrl-0 = <&pinctrl_csi1>;
> > +            clocks = <&clk 0>;
> > +            assigned-clocks = <&clk 0>;
> > +            assigned-clock-rates = <25000000>;
> > +            vdda-supply = <&reg_camera_vdda>;
> > +            vddd-supply = <&reg_camera_vddd>;
> > +            vddio-supply = <&reg_camera_vddio>;
> > +            reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> > +            shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
> > +
> > +            port {
> > +                camera_out: endpoint {
> > +                    remote-endpoint = <&csi1_ep1>;
> > +                    link-frequencies = /bits/ 64
> > +                        <80000000 200000000>;
> > +                    data-lanes = <1 2>;
>
> "make dt_binding_check":
>
>    
> Documentation/devicetree/bindings/media/i2c/hynix,hi846.example.dt.ya
> ml:
> camera@20: port:endpoint: Unevaluated properties are not allowed
> ('link-frequencies', 'data-lanes' were unexpected)
>     From schema:
> Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
>
> > +                };
> > +            };
> > +        };
> > +    };
>
> Gr{oetje,eeting}s,
>
>                         Geert


thanks a lot Geert, but I can't reproduce this on linux-next. Which
tree did you run it against?

What I *do* see is the following during dtbs_check, so I guess I could
remove "orientation" and "rotation" from the example, which would be
kind of sad because these useful properties are not yet too wide know
anyway in the media device driver world...

/home/martin/dev/purism-forks/linux-
next/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml:
camera-front@20: 'orientation', 'rotation' do not match any of the
regexes: 'pinctrl-[0-9]+'
From schema: /home/martin/dev/purism-forks/linux-
next/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml


if you can be more speicific I'll definitely try to reproduce again
though.

thanks,
martin


\
 
 \ /
  Last update: 2021-11-26 11:07    [W:0.138 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site