lkml.org 
[lkml]   [2021]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectNeed help to debug ata errors
Hi All,

I am trying to run linux as a DomU guest on Xen with AHCI assigned to it.
I can confirm that SATA works (ie able to detect sdb) as a Dom0 guest.
However, it does not work as a DomU guest.

Hardware :- ZCU102 board and it has two sata ports
Kernel :- 5.10

I have enabled the debug logs in drivers/ata

1. Logs from dom0 (where SATA works) https://pastebin.com/2BhMDq47
2. Logs from domU (where SATA does not work) https://pastebin.com/fE8WZnZ0

Can some help me to answer these questions
1. What does this mean "1st FIS failed" ?

2. In the dom0 logs, PORT_SCR_ERR = 0x41d0002 whereas in domU logs,
PORT_SCR_ERR = 0. Does it give some hints ?

3. Any other issues or hints to debug this ?

I can confirm that in domU scenario, we do not get any interrupts from
the device. What might be going wrong here ?

Thanks in advance.

Kind regards,
Ayan

\
 
 \ /
  Last update: 2021-12-03 12:12    [W:0.075 / U:2.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site