lkml.org 
[lkml]   [2021]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] soc: ti: smartreflex: Use platform_get_irq() to get the interrupt
Date
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* Updated commit message
* Drop check for IRQ0
* Switched to using platform_get_irq() so that the probe won't
fail silently as requested by Nishanth.

v1:
* https://www.spinics.net/lists/arm-kernel/msg942549.html
---
drivers/soc/ti/smartreflex.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/soc/ti/smartreflex.c b/drivers/soc/ti/smartreflex.c
index b5b2fa538d5c..3e2cddad0d93 100644
--- a/drivers/soc/ti/smartreflex.c
+++ b/drivers/soc/ti/smartreflex.c
@@ -819,7 +819,7 @@ static int omap_sr_probe(struct platform_device *pdev)
{
struct omap_sr *sr_info;
struct omap_sr_data *pdata = pdev->dev.platform_data;
- struct resource *mem, *irq;
+ struct resource *mem;
struct dentry *nvalue_dir;
int i, ret = 0;

@@ -844,7 +844,12 @@ static int omap_sr_probe(struct platform_device *pdev)
if (IS_ERR(sr_info->base))
return PTR_ERR(sr_info->base);

- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0 && ret != -ENXIO)
+ return ret;
+ if (ret > 0)
+ sr_info->irq = ret;
+ ret = 0;

sr_info->fck = devm_clk_get(pdev->dev.parent, "fck");
if (IS_ERR(sr_info->fck))
@@ -870,9 +875,6 @@ static int omap_sr_probe(struct platform_device *pdev)
sr_info->autocomp_active = false;
sr_info->ip_type = pdata->ip_type;

- if (irq)
- sr_info->irq = irq->start;
-
sr_set_clk_length(sr_info);

list_add(&sr_info->node, &sr_list);
--
2.17.1
\
 
 \ /
  Last update: 2021-12-24 20:59    [W:0.566 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site