lkml.org 
[lkml]   [2021]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
Date
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

This patch break's the for loop if there are no more interrupts instead
of continuing as done in previous code.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* Simplified checking error code
* Break loop earlier if no interrupts are seen
---
drivers/thermal/rcar_thermal.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index b49f04daaf47..ff9c55999ddf 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -445,7 +445,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
struct rcar_thermal_common *common;
struct rcar_thermal_priv *priv;
struct device *dev = &pdev->dev;
- struct resource *res, *irq;
+ struct resource *res;
const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
int mres = 0;
int i;
@@ -467,9 +467,16 @@ static int rcar_thermal_probe(struct platform_device *pdev)
pm_runtime_get_sync(dev);

for (i = 0; i < chip->nirqs; i++) {
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
- if (!irq)
- continue;
+ int irq;
+
+ irq = platform_get_irq_optional(pdev, i);
+ if (irq == -ENXIO)
+ break;
+ if (irq < 0) {
+ ret = irq;
+ goto error_unregister;
+ }
+
if (!common->base) {
/*
* platform has IRQ support.
@@ -487,7 +494,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
idle = 0; /* polling delay is not needed */
}

- ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+ ret = devm_request_irq(dev, irq, rcar_thermal_irq,
IRQF_SHARED, dev_name(dev), common);
if (ret) {
dev_err(dev, "irq request failed\n ");
--
2.17.1
\
 
 \ /
  Last update: 2021-12-24 20:49    [W:0.051 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site