lkml.org 
[lkml]   [2021]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4] drivers: net: smc911x: Check for error irq
Date
As platform_get_irq() could fail and return error irq number.
And the error irq will finally cause the failure of the request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.

Fixes: ae150435b59e ("smsc: Move the SMC (SMSC) drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
---
Changlog:

v3 -> v4

*Change 1. Using error varaible to check.
*Change 2. Fix commit message.
*Change 3. Refine commit message.
---
drivers/net/ethernet/smsc/smc911x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index 22cdbf12c823..9470d9c07fed 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -2069,7 +2069,12 @@ static int smc911x_drv_probe(struct platform_device *pdev)
SET_NETDEV_DEV(ndev, &pdev->dev);

ndev->dma = (unsigned char)-1;
- ndev->irq = platform_get_irq(pdev, 0);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto release_both;
+ ndev->irq = ret;
+
lp = netdev_priv(ndev);
lp->netdev = ndev;
#ifdef SMC_DYNAMIC_BUS_CONFIG
--
2.25.1
\
 
 \ /
  Last update: 2021-12-24 02:41    [W:0.032 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site