lkml.org 
[lkml]   [2021]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] serial: mps2-uart: Check for error irq
Date
Because of the possible failure of the platform_get_irq(), it should be
better to check it to avoid the use of error irq.

Fixes: 041f031def33 ("serial: mps2-uart: add MPS2 UART driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
---
Changelog:

v2 -> v3

*Change 1. Using error variable to check.
*Change 2. Add new commit message.
---
drivers/tty/serial/mps2-uart.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
index 587b42f754cb..24a52300d8d9 100644
--- a/drivers/tty/serial/mps2-uart.c
+++ b/drivers/tty/serial/mps2-uart.c
@@ -584,11 +584,29 @@ static int mps2_init_port(struct platform_device *pdev,


if (mps_port->flags & UART_PORT_COMBINED_IRQ) {
- mps_port->port.irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+
+ mps_port->port.irq = ret;
} else {
- mps_port->rx_irq = platform_get_irq(pdev, 0);
- mps_port->tx_irq = platform_get_irq(pdev, 1);
- mps_port->port.irq = platform_get_irq(pdev, 2);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+
+ mps_port->rx_irq = ret;
+
+ ret = platform_get_irq(pdev, 1);
+ if (ret < 0)
+ return ret;
+
+ mps_port->tx_irq = ret;
+
+ ret = platform_get_irq(pdev, 2);
+ if (ret < 0)
+ return ret;
+
+ mps_port->port.irq = ret;
}

return ret;
--
2.25.1
\
 
 \ /
  Last update: 2021-12-23 13:15    [W:0.036 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site