lkml.org 
[lkml]   [2021]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
Date
Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
Runtime suspend of phy drivers was failing from DWC3 driver as runtime
usage value is 2 because the phy is initialized from DWC3 and HCD core.
DWC3 manages phy in their core drivers. Set this quirk to avoid phy
initialization in HCD core.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
---
v5:
Added comment to explain the change done.
v4:
Changed pdev->dev.parent->of_node to sysdev->of_node

drivers/usb/host/xhci-plat.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index c1edcc9..e6014d4 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -327,6 +327,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
&xhci->imod_interval);
}

+ /*
+ * Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
+ * DWC3 manages phy in their core drivers. Set this quirk to avoid phy
+ * initialization in HCD core.
+ */
+ if (of_device_is_compatible(sysdev->of_node, "snps,dwc3"))
+ xhci->quirks |= XHCI_SKIP_PHY_INIT;
+
hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
ret = PTR_ERR(hcd->usb_phy);
--
2.7.4
\
 
 \ /
  Last update: 2021-12-22 07:11    [W:0.120 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site