Messages in this thread | | | Date | Thu, 2 Dec 2021 09:25:09 +0100 | Subject | Re: [PATCH 3/6] dt-bindings: i2c: exynos5: Add bus clock | From | Krzysztof Kozlowski <> |
| |
On 01/12/2021 20:04, Sam Protsenko wrote: > In new Exynos SoCs (like Exynos850) where HSI2C is implemented as a > part of USIv2 block, there are two clocks provided to HSI2C controller: > - PCLK: bus clock (APB), provides access to register interface > - IPCLK: operating IP-core clock; SCL is derived from this one > > Both clocks have to be asserted for HSI2C to be functional in that case. > > Modify bindings doc to allow specifying bus clock in addition to > already described operating clock. Make it optional though, as older > Exynos SoC variants only have one HSI2C clock.
I understand that it is required on newer SoCs, so you need "if:" adding it to required properties on Autov8 or 850.
> > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > --- > .../devicetree/bindings/i2c/i2c-exynos5.yaml | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml > index db20e703dea0..a212c1d5e7d9 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml > +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml > @@ -49,11 +49,16 @@ properties: > clock-frequency is >= 1MHz. > > clocks: > - maxItems: 1 > - description: I2C operating clock > + minItems: 1 > + items: > + - description: I2C operating clock > + - description: Bus clock (APB) > > clock-names: > - const: hsi2c > + minItems: 1 > + items: > + - const: hsi2c > + - const: hsi2c_pclk > > required: > - compatible >
Best regards, Krzysztof
| |