lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: lantiq: Use platform_get_irq() to get the interrupt
Date
Use the preferred platform_get_irq() call to retrieve the interrupts. These
have the advantage of working with deferred probe and gets us one step
closer to removing of_irq_to_resource_table().

Signed-off-by: Rob Herring <robh@kernel.org>
---
drivers/tty/serial/lantiq.c | 28 +++++++++++++---------------
1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 497b334bc845..bb059418cb82 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -16,8 +16,6 @@
#include <linux/ioport.h>
#include <linux/lantiq.h>
#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
@@ -728,19 +726,19 @@ static struct uart_driver lqasc_reg = {
static int fetch_irq_lantiq(struct device *dev, struct ltq_uart_port *ltq_port)
{
struct uart_port *port = &ltq_port->port;
- struct resource irqres[3];
- int ret;
+ struct platform_device *pdev = to_platform_device(dev);

- ret = of_irq_to_resource_table(dev->of_node, irqres, 3);
- if (ret != 3) {
- dev_err(dev,
- "failed to get IRQs for serial port\n");
- return -ENODEV;
- }
- ltq_port->tx_irq = irqres[0].start;
- ltq_port->rx_irq = irqres[1].start;
- ltq_port->err_irq = irqres[2].start;
- port->irq = irqres[0].start;
+ ltq_port->tx_irq = platform_get_irq(pdev, 0);
+ if (ltq_port->tx_irq < 0)
+ return ltq_port->tx_irq;
+ ltq_port->rx_irq = platform_get_irq(pdev, 1);
+ if (ltq_port->rx_irq < 0)
+ return ltq_port->rx_irq;
+ ltq_port->err_irq = platform_get_irq(pdev, 2);
+ if (ltq_port->err_irq < 0)
+ return ltq_port->err_irq;
+
+ port->irq = ltq_port->tx_irq;

return 0;
}
@@ -793,7 +791,7 @@ static int fetch_irq_intel(struct device *dev, struct ltq_uart_port *ltq_port)
struct uart_port *port = &ltq_port->port;
int ret;

- ret = of_irq_get(dev->of_node, 0);
+ ret = platform_get_irq(to_platform_device(dev), 0);
if (ret < 0) {
dev_err(dev, "failed to fetch IRQ for serial port\n");
return ret;
--
2.32.0
\
 
 \ /
  Last update: 2021-12-15 23:49    [W:0.100 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site