lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/8] phy: phy-rockchip-inno-usb2: support standalone phy nodes
Date
New Rockchip devices have the usb2 phy devices as standalone nodes
instead of children of the grf node.
Allow the driver to find the grf node from a phandle.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>

---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 5cfa7169d879..29e3a0da8c26 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1074,12 +1074,19 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
return -EINVAL;
}

- if (!dev->parent || !dev->parent->of_node)
- return -EINVAL;
+ if (!dev->parent || !dev->parent->of_node) {
+ rphy->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,usbgrf");
+ if (IS_ERR(rphy->grf)) {
+ dev_err(dev, "failed to locate usbgrf\n");
+ return PTR_ERR(rphy->grf);
+ }
+ }

- rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
- if (IS_ERR(rphy->grf))
- return PTR_ERR(rphy->grf);
+ else {
+ rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(rphy->grf))
+ return PTR_ERR(rphy->grf);
+ }

if (of_device_is_compatible(np, "rockchip,rv1108-usb2phy")) {
rphy->usbgrf =
--
2.25.1
\
 
 \ /
  Last update: 2021-12-15 22:03    [W:0.104 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site