lkml.org 
[lkml]   [2021]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy
On 15-12-21, 16:02, Peter Geis wrote:
> Good Afternoon,
>
> This is my series to support the usb2 phy devices on the rk356x.
> The rk356x phy has a single muxed interrupt and has moved the usb2phy
> nodes out of the grf and into their own nodes.
> The phy needs to tie back into the grf for register control, similar to
> the rv1108.
> By moving the phys into their own nodes, they now have full
> #address_cells = 2 register addresses, but they still reside below the 32bit
> mmio range.
>
> This driver series only supports the host configuration for the rk356x.
> I have have tested it on the following:
> rk3566 - Pine64 Quartz64 Model A
> rk3399 - Pine64 Rockpro64
>
> Please provide feedback and comments as you see fit.

Applied patches 2-6 to phy-next

Thanks

--
~Vinod

\
 
 \ /
  Last update: 2021-12-23 12:25    [W:0.072 / U:2.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site