lkml.org 
[lkml]   [2021]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] Input: add 'safe' user switch codes
Date
All existing SW input codes define an action which can be interpreted by
a user environment to adapt to the condition of the switch.

For example, switches to define the audio mute, will prevent audio
playback, and switches to indicate lid and covers being closed may
disable displays.

Many evaluation platforms provide switches which can be connected to the
input system but associating these to an action incorrectly could
provide inconsistent end user experiences due to unmarked switch
positions.

Define two custom user defined switches allowing hardware descriptions
to be created whereby the position of the switch is not interpreted as
any standard condition that will affect a user experience.

This allows wiring up custom generic switches in a way that will allow
them to be read and processed, without incurring undesired or otherwise
undocumented (by the hardware) 'default' behaviours.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---

Sigh, a compile test might have at least saved the buildbots the trouble
of notifying me I also need to update the INPUT_DEVICE_ID_SW_MAX. But
even so - I'm really looking for a discussion on the best ways to
describe a non-defined switch in device tree.

Here's a compiling v2 ;-) But the real questions are :

- Should an existing feature switch be used for generic switches?
- Should we even have a 'user' defined switch?
- If we add user switches, how many?


include/linux/mod_devicetable.h | 2 +-
include/uapi/linux/input-event-codes.h | 4 +++-
2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index ae2e75d15b21..dfa1e4f41cd8 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -326,7 +326,7 @@ struct pcmcia_device_id {
#define INPUT_DEVICE_ID_LED_MAX 0x0f
#define INPUT_DEVICE_ID_SND_MAX 0x07
#define INPUT_DEVICE_ID_FF_MAX 0x7f
-#define INPUT_DEVICE_ID_SW_MAX 0x10
+#define INPUT_DEVICE_ID_SW_MAX 0x12
#define INPUT_DEVICE_ID_PROP_MAX 0x1f

#define INPUT_DEVICE_ID_MATCH_BUS 1
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 225ec87d4f22..84a7b3debcb3 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -894,7 +894,9 @@
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
#define SW_MACHINE_COVER 0x10 /* set = cover closed */
-#define SW_MAX 0x10
+#define SW_1 0x11 /* set = user defined */
+#define SW_2 0x12 /* set = user defined */
+#define SW_MAX 0x12
#define SW_CNT (SW_MAX+1)

/*
--
2.30.2
\
 
 \ /
  Last update: 2021-11-05 11:36    [W:0.269 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site