lkml.org 
[lkml]   [2021]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 10/16] Revert "usb: core: hcd: Add support for deferring roothub registration"
Date
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit d58fc9e9c15825e3a8fc1ef3b52495c93c41e71c which is
commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7 upstream.

It has been reported to be causing problems in Arch and Fedora bug
reports.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576
Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/hcd.c | 29 ++++++-----------------------
include/linux/usb/hcd.h | 2 --
2 files changed, 6 insertions(+), 25 deletions(-)

--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2640,7 +2640,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
{
int retval;
struct usb_device *rhdev;
- struct usb_hcd *shared_hcd;

if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
@@ -2797,26 +2796,13 @@ int usb_add_hcd(struct usb_hcd *hcd,
goto err_hcd_driver_start;
}

- /* starting here, usbcore will pay attention to the shared HCD roothub */
- shared_hcd = hcd->shared_hcd;
- if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) {
- retval = register_root_hub(shared_hcd);
- if (retval != 0)
- goto err_register_root_hub;
-
- if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd))
- usb_hcd_poll_rh_status(shared_hcd);
- }
-
/* starting here, usbcore will pay attention to this root hub */
- if (!HCD_DEFER_RH_REGISTER(hcd)) {
- retval = register_root_hub(hcd);
- if (retval != 0)
- goto err_register_root_hub;
+ retval = register_root_hub(hcd);
+ if (retval != 0)
+ goto err_register_root_hub;

- if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
- usb_hcd_poll_rh_status(hcd);
- }
+ if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
+ usb_hcd_poll_rh_status(hcd);

return retval;

@@ -2859,7 +2845,6 @@ EXPORT_SYMBOL_GPL(usb_add_hcd);
void usb_remove_hcd(struct usb_hcd *hcd)
{
struct usb_device *rhdev = hcd->self.root_hub;
- bool rh_registered;

dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);

@@ -2870,7 +2855,6 @@ void usb_remove_hcd(struct usb_hcd *hcd)

dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
spin_lock_irq (&hcd_root_hub_lock);
- rh_registered = hcd->rh_registered;
hcd->rh_registered = 0;
spin_unlock_irq (&hcd_root_hub_lock);

@@ -2880,8 +2864,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
cancel_work_sync(&hcd->died_work);

mutex_lock(&usb_bus_idr_lock);
- if (rh_registered)
- usb_disconnect(&rhdev); /* Sets rhdev to NULL */
+ usb_disconnect(&rhdev); /* Sets rhdev to NULL */
mutex_unlock(&usb_bus_idr_lock);

/*
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -124,7 +124,6 @@ struct usb_hcd {
#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
#define HCD_FLAG_DEAD 6 /* controller has died? */
#define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */
-#define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */

/* The flags can be tested using these macros; they are likely to
* be slightly faster than test_bit().
@@ -135,7 +134,6 @@ struct usb_hcd {
#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
-#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER))

/*
* Specifies if interfaces are authorized by default

\
 
 \ /
  Last update: 2021-11-04 15:17    [W:0.100 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site