lkml.org 
[lkml]   [2021]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/4] support the Librem 5 front camera
Date
hi Shawn and all whom this concerns,

3 weeks ago I sent this as RFC that didn't yield feedback, see below :)
Here's the same patches as a proper patchset ready to apply.

The first patch adds a shared "r3.dtsi" and is only refactoring.
Patch 2 that describes the power supplies on the Librem 5 board as regulators.
Patch 3 and 4 should be straight forward camera descriptions according to
the drivers.

thank you,
martin

revision history
----------------
RFC v1:
https://lore.kernel.org/phone-devel/20211015083506.4182875-1-martin.kepplinger@puri.sm/
and more specifically thoughts on patch 2:
https://lore.kernel.org/phone-devel/20211015083506.4182875-3-martin.kepplinger@puri.sm/


Martin Kepplinger (4):
arm64: dts: split out a shared imx8mq-librem5-r3.dtsi description
arm64: dts: imx8mq-librem5: describe power supply for cameras
arm64: dts: imx8mq-librem5: describe the selfie cam
arm64: dts: imx8mq-librem5-r3.dtsi: describe selfie cam XSHUTDOWN pin

.../boot/dts/freescale/imx8mq-librem5-r3.dts | 25 +----
.../boot/dts/freescale/imx8mq-librem5-r3.dtsi | 45 +++++++++
.../boot/dts/freescale/imx8mq-librem5-r4.dts | 16 +---
.../boot/dts/freescale/imx8mq-librem5.dtsi | 96 ++++++++++++++++++-
4 files changed, 144 insertions(+), 38 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi

--
2.30.2

\
 
 \ /
  Last update: 2021-11-04 14:25    [W:0.464 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site