lkml.org 
[lkml]   [2021]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] dt-bindings: watchdog: da9062: add watchdog timeout mode
Date
Document the watchdog timeout mode property. If this property is used
the user can select what happens on watchdog timeout. Set this property
to 1 to enable SHUTDOWN (the device resets), set it to 0 and the device
will go to POWERDOWN on watchdog timeout.

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
---
Documentation/devicetree/bindings/watchdog/da9062-wdt.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
index 950e4fba8dbc..e3e6e56cee21 100644
--- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
@@ -10,6 +10,9 @@ Optional properties:
- dlg,use-sw-pm: Add this property to disable the watchdog during suspend.
Only use this option if you can't use the watchdog automatic suspend
function during a suspend (see register CONTROL_B).
+- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the
+ watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers
+ POWERDOWN. Can be 0 or 1.

Example: DA9062

--
2.25.1
\
 
 \ /
  Last update: 2021-11-30 14:43    [W:0.125 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site