lkml.org 
[lkml]   [2021]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/4] dt-bindings: watchdog: da9062: add watchdog timeout mode
From
Date


On 30. 11. 21 14:42, Andrej Picej wrote:
> Document the watchdog timeout mode property. If this property is used
> the user can select what happens on watchdog timeout. Set this property
> to 1 to enable SHUTDOWN (the device resets), set it to 0 and the device
> will go to POWERDOWN on watchdog timeout.
>
> Signed-off-by: Andrej Picej <andrej.picej@norik.com>
> ---
> Documentation/devicetree/bindings/watchdog/da9062-wdt.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
> index 950e4fba8dbc..e3e6e56cee21 100644
> --- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
> @@ -10,6 +10,9 @@ Optional properties:
> - dlg,use-sw-pm: Add this property to disable the watchdog during suspend.
> Only use this option if you can't use the watchdog automatic suspend
> function during a suspend (see register CONTROL_B).
> +- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the
> + watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers
> + POWERDOWN. Can be 0 or 1.
>
> Example: DA9062
>
>
Changes in v2:
- new patch, document new DT binding

\
 
 \ /
  Last update: 2021-11-30 14:55    [W:0.078 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site