lkml.org 
[lkml]   [2021]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH V7 05/18] x86/pks: Add PKS setup code
Date
On Tue, Aug 03 2021 at 21:32, ira weiny wrote:
> +#ifdef CONFIG_ARCH_ENABLE_SUPERVISOR_PKEYS
> +
> +void setup_pks(void);

pks_setup()

> +#ifdef CONFIG_ARCH_ENABLE_SUPERVISOR_PKEYS
> +
> +static DEFINE_PER_CPU(u32, pkrs_cache);
> +u32 __read_mostly pkrs_init_value;
> +
> +/*
> + * write_pkrs() optimizes MSR writes by maintaining a per cpu cache which can
> + * be checked quickly.
> + *
> + * It should also be noted that the underlying WRMSR(MSR_IA32_PKRS) is not
> + * serializing but still maintains ordering properties similar to WRPKRU.
> + * The current SDM section on PKRS needs updating but should be the same as
> + * that of WRPKRU. So to quote from the WRPKRU text:
> + *
> + * WRPKRU will never execute transiently. Memory accesses
> + * affected by PKRU register will not execute (even transiently)
> + * until all prior executions of WRPKRU have completed execution
> + * and updated the PKRU register.
> + */
> +void write_pkrs(u32 new_pkrs)

pkrs_write()

> +{
> + u32 *pkrs;
> +
> + if (!static_cpu_has(X86_FEATURE_PKS))
> + return;

cpu_feature_enabled() if at all. Why is this function even invoked
when PKS is off?

> +
> + pkrs = get_cpu_ptr(&pkrs_cache);

As far as I've seen this is mostly called from non-preemptible
regions. So that get/put pair is pointless. Stick a lockdep assert into
the code and disable preemption at the maybe one callsite which needs
it.

> + if (*pkrs != new_pkrs) {
> + *pkrs = new_pkrs;
> + wrmsrl(MSR_IA32_PKRS, new_pkrs);
> + }
> + put_cpu_ptr(pkrs);
> +}
> +
> +/*
> + * Build a default PKRS value from the array specified by consumers
> + */
> +static int __init create_initial_pkrs_value(void)
> +{
> + /* All users get Access Disabled unless changed below */
> + u8 consumer_defaults[PKS_NUM_PKEYS] = {
> + [0 ... PKS_NUM_PKEYS-1] = PKR_AD_BIT
> + };
> + int i;
> +
> + consumer_defaults[PKS_KEY_DEFAULT] = PKR_RW_BIT;
> +
> + /* Ensure the number of consumers is less than the number of keys */
> + BUILD_BUG_ON(PKS_KEY_NR_CONSUMERS > PKS_NUM_PKEYS);
> +
> + pkrs_init_value = 0;

This needs to be cleared because the BSS might be non zero?

> + /* Fill the defaults for the consumers */
> + for (i = 0; i < PKS_NUM_PKEYS; i++)
> + pkrs_init_value |= PKR_VALUE(i, consumer_defaults[i]);

Also PKR_RW_BIT is a horrible invention:

> +#define PKR_RW_BIT 0x0
> #define PKR_AD_BIT 0x1
> #define PKR_WD_BIT 0x2
> #define PKR_BITS_PER_PKEY 2

This makes my brain spin. How do you fit 3 bits into 2 bits per key?
That's really non-intuitive.

PKR_RW_ENABLE 0x0
PKR_ACCESS_DISABLE 0x1
PKR_WRITE_DISABLE 0x2

makes it obvious what this is about, no?

Aside of that, the function which set's up the init value is really
bogus. As you explained in the cover letter a kernel user has to:

1) Claim an index in the enum
2) Add a default value to the array in that function

Seriously? How is that any better than doing:

#define PKS_KEY0_DEFAULT PKR_RW_ENABLE
#define PKS_KEY1_DEFAULT PKR_ACCESS_DISABLE
...
#define PKS_KEY15_DEFAULT PKR_ACCESS_DISABLE

and let the compiler construct pkrs_init_value?

TBH, it's not and this function has to be ripped out in case that you
need a dynamic allocation of keys some day. So what is this buying us
aside of horrible to read and utterly pointless code?

> + return 0;
> +}
> +early_initcall(create_initial_pkrs_value);
> +
> +/*
> + * PKS is independent of PKU and either or both may be supported on a CPU.
> + * Configure PKS if the CPU supports the feature.
> + */
> +void setup_pks(void)
> +{
> + if (!cpu_feature_enabled(X86_FEATURE_PKS))
> + return;
> +
> + write_pkrs(pkrs_init_value);

Is the init value set up _before_ this function is invoked for the first
time?

Thanks,

tglx

\
 
 \ /
  Last update: 2021-11-25 16:18    [W:0.266 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site