lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] firmware: mediatek: add adsp ipc protocol interface
On Wed, Nov 24, 2021 at 04:45:14PM +0800, allen-kh.cheng wrote:
> drivers/firmware/Kconfig | 1 +
> drivers/firmware/Makefile | 1 +
> drivers/firmware/mediatek/Kconfig | 10 ++
> drivers/firmware/mediatek/Makefile | 2 +
> drivers/firmware/mediatek/mtk-adsp-ipc.c | 130 ++++++++++++++++++
> .../linux/firmware/mediatek/mtk-adsp-ipc.h | 72 ++++++++++
> 6 files changed, 216 insertions(+)
> create mode 100644 drivers/firmware/mediatek/Kconfig
> create mode 100644 drivers/firmware/mediatek/Makefile
> create mode 100644 drivers/firmware/mediatek/mtk-adsp-ipc.c
> create mode 100644 include/linux/firmware/mediatek/mtk-adsp-ipc.h

The patch should move before the 2nd patch in the series as the 2nd patch uses mtk-adsp-ipc.h.

> diff --git a/drivers/firmware/mediatek/mtk-adsp-ipc.c b/drivers/firmware/mediatek/mtk-adsp-ipc.c
[...]
> +int adsp_ipc_send(struct mtk_adsp_ipc *ipc, unsigned int idx, uint32_t op)
> +{
> + struct mtk_adsp_chan *dsp_chan = &ipc->chans[idx];
> + struct adsp_mbox_ch_info *ch_info = dsp_chan->ch->con_priv;
> + int ret;
> +
> + if (idx >= MTK_ADSP_MBOX_NUM)
> + return -EINVAL;

If idx >= MTK_ADSP_MBOX_NUM, the invalid memory access has occurred at beginning of the function.

> +static int mtk_adsp_ipc_probe(struct platform_device *pdev)
> +{
[...]
> + device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);

Why does it need to call device_set_of_node_from_dev()?

> + for (i = 0; i < MTK_ADSP_MBOX_NUM; i++) {
> + chan_name = kasprintf(GFP_KERNEL, "mbox%d", i);
> + if (!chan_name)
> + return -ENOMEM;
> +
> + dsp_chan = &dsp_ipc->chans[i];
> + cl = &dsp_chan->cl;
> + cl->dev = dev->parent;
> + cl->tx_block = false;
> + cl->knows_txdone = false;
> + cl->tx_prepare = NULL;
> + cl->rx_callback = adsp_ipc_recv;
> +
> + dsp_chan->ipc = dsp_ipc;
> + dsp_chan->idx = i;
> + dsp_chan->ch = mbox_request_channel_byname(cl, chan_name);
> + if (IS_ERR(dsp_chan->ch)) {
> + ret = PTR_ERR(dsp_chan->ch);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "Failed to request mbox chan %d ret %d\n",
> + i, ret);

If ret == -EPROBE_DEFER, wouldn't it need to return -EPROBE_DEFER? It doesn't retry later if -EPROBE_DEFER.

\
 
 \ /
  Last update: 2021-11-24 11:26    [W:0.102 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site