lkml.org 
[lkml]   [2021]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 03/11] spi: pic32: stop setting dma_config->slave_id
Date
From: Arnd Bergmann <arnd@arndb.de>

Setting slave_id makes no sense with DT based probing, and
should eventually get removed entirely. Address this driver
by no longer setting the field here.

I could not find which DMA driver is used on PIC32, if it's
in the tree at all, but none of the obvious ones even care
about slave_id any more.

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/spi/spi-pic32.c | 2 --
1 file changed, 2 deletions(-)

diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index 5eb7b61bbb4d..f86433b29260 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -370,7 +370,6 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width)
cfg.src_addr_width = dma_width;
cfg.dst_addr_width = dma_width;
/* tx channel */
- cfg.slave_id = pic32s->tx_irq;
cfg.direction = DMA_MEM_TO_DEV;
ret = dmaengine_slave_config(master->dma_tx, &cfg);
if (ret) {
@@ -378,7 +377,6 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width)
return ret;
}
/* rx channel */
- cfg.slave_id = pic32s->rx_irq;
cfg.direction = DMA_DEV_TO_MEM;
ret = dmaengine_slave_config(master->dma_rx, &cfg);
if (ret)
--
2.29.2
\
 
 \ /
  Last update: 2021-11-22 23:23    [W:0.104 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site