lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 01/11] ASoC: tegra20-spdif: stop setting slave_id
From
Date
23.11.2021 01:21, Arnd Bergmann пишет:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The DMA resource is never set up anywhere, and passing this as slave_id
> has not been the proper procedure in a long time.
>
> As a preparation for removing all slave_id references from the ALSA code,
> remove this one.
>
> According to Dmitry Osipenko, this driver has never been used and
> the mechanism for configuring DMA would not work as it is implemented,
> so this part will get rewritten when the driver gets put into use
> again in the future.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> sound/soc/tegra/tegra20_spdif.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
> index 9fdc82d58db3..1c3385da6f82 100644
> --- a/sound/soc/tegra/tegra20_spdif.c
> +++ b/sound/soc/tegra/tegra20_spdif.c
> @@ -284,7 +284,6 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev)
> spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
> spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> spdif->playback_dma_data.maxburst = 4;
> - spdif->playback_dma_data.slave_id = dmareq->start;
>
> pm_runtime_enable(&pdev->dev);
>
>

Thanks, Arnd!

The commit message is correct, however you could remove even more code
here. But there is no need to make a v3 just because this patch because
I already prepared patchset that revives this S/PDIF driver and enables
HDMI audio on Tegra20. I'll take care of cleaning up the whole code of
this driver.

diff --git a/sound/soc/tegra/tegra20_spdif.c
b/sound/soc/tegra/tegra20_spdif.c
index 7751575cd6d6..1c3385da6f82 100644
--- a/sound/soc/tegra/tegra20_spdif.c
+++ b/sound/soc/tegra/tegra20_spdif.c
@@ -251,7 +251,7 @@ static const struct regmap_config
tegra20_spdif_regmap_config = {
static int tegra20_spdif_platform_probe(struct platform_device *pdev)
{
struct tegra20_spdif *spdif;
- struct resource *mem, *dmareq;
+ struct resource *mem;
void __iomem *regs;
int ret;

@@ -273,12 +273,6 @@ static int tegra20_spdif_platform_probe(struct
platform_device *pdev)
if (IS_ERR(regs))
return PTR_ERR(regs);

- dmareq = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!dmareq) {
- dev_err(&pdev->dev, "No DMA resource\n");
- return -ENODEV;
- }
-
spdif->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
&tegra20_spdif_regmap_config);
if (IS_ERR(spdif->regmap)) {
@@ -290,7 +284,6 @@ static int tegra20_spdif_platform_probe(struct
platform_device *pdev)
spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
spdif->playback_dma_data.maxburst = 4;
- spdif->playback_dma_data.slave_id = dmareq->start;

pm_runtime_enable(&pdev->dev);

\
 
 \ /
  Last update: 2021-11-24 17:33    [W:0.385 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site