lkml.org 
[lkml]   [2021]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/16] arm64: dts: qcom: sm8350-sagami: Enable and populate I2C/SPI nodes
Date
Based on current driver availability, add either nodes or comments regarding
peripherals connected via I2C/SPI.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 101 ++++++++++++++++++
1 file changed, 101 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index b50f04ffee95..c44376aa0742 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -75,6 +75,93 @@ ramoops@ffc00000 {
};
};

+&i2c1 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Some subset of SONY IMX663 camera sensor @ 38 */
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
+};
+
+&i2c11 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ cs35l41_l: cs35l41@40 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x40>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+
+ cs35l41_r: cs35l41@41 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x41>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+ /* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c15 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c17 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
&pmk8350_rtc {
status = "okay";
};
@@ -100,8 +187,22 @@ &qupv3_id_2 {
status = "okay";
};

+&spi14 {
+ status = "okay";
+
+ /* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
&tlmm {
gpio-reserved-ranges = <44 4>;
+
+ ts_int_default: ts-int-default {
+ pin = "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
};

/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
--
2.33.1
\
 
 \ /
  Last update: 2021-11-14 02:29    [W:0.193 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site