lkml.org 
[lkml]   [2021]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 04/16] arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer
From

On 30/11/2021 03:05, Stephen Boyd wrote:
> Quoting Konrad Dybcio (2021-11-13 17:27:43)
>> Arch timer runs at 19.2 MHz. Specify the rate in the timer node.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
>> ---
>> arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>> index a30ba3193d84..60866a20a55c 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>> @@ -2484,5 +2484,6 @@ timer {
>> <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>> + clock-frequency = <19200000>;
> Does the firmware not set the frequency properly?

It does on my device on the current firmware version (it wouldn't really
boot if it didn't, no?),

but who knows if it always will, or if it always has been..


It's present in downstream too, so I reckon it does not hurt to have it
here too, even

for completeness-of-describing-the-machine-properly sake.


Konrad

\
 
 \ /
  Last update: 2021-11-30 20:59    [W:0.096 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site