lkml.org 
[lkml]   [2021]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] atomisp: add support for enum frame rate and sizes
Date
Adding support for those two ioctls are trivial, and allow testing
different resolutions with the driver.

Together with some improvements I made at camorama, it is now
possible to change the atomisp sensor's resolution at the GUI.

Talking about camorama, I also added there an option to disable
the Gtk cairo_scale() calls. On my tests here, placing ov2680 on
its maximum resolution, I'm getting a framerate of 26 fps, which
sounds reasonable, as the maximum would be 30fps, and I'm not
using daylight.

When letting cairo_scale() to run, the rate reduces to 8 fps, meaning
that Gtk is not using GPU acceleration.

Funny enough, when resolution is lower, atomisp is giving a very
bad framerate (around 3fps, even with the scaler disabled).

This is a very weird result, probably indicating some problems inside
the driver. That requires further investigation.

Mauro Carvalho Chehab (3):
media: atomisp-ov2680: implement enum frame intervals
media: atomisp-ov2680: adjust the maximum frame rate
media: atomisp: implement enum framesize/frameinterval

.../media/atomisp/i2c/atomisp-ov2680.c | 21 ++++++++
drivers/staging/media/atomisp/i2c/ov2680.h | 14 ++---
.../staging/media/atomisp/pci/atomisp_ioctl.c | 53 +++++++++++++++++++
3 files changed, 81 insertions(+), 7 deletions(-)

--
2.33.1


\
 
 \ /
  Last update: 2021-11-11 18:28    [W:0.058 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site