lkml.org 
[lkml]   [2021]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: pinctrl: convert controller description to the json-schema
Date
From: Rafał Miłecki <rafal@milecki.pl>

This helps validating DTS and writing YAML files.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bindings/pinctrl/pinctrl-bindings.txt | 41 +----------------
.../devicetree/bindings/pinctrl/pinctrl.yaml | 45 +++++++++++++++++++
2 files changed, 46 insertions(+), 40 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 9dae60acf950..6904072d3944 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -97,47 +97,8 @@ For example:
};

== Pin controller devices ==
-Required properties: See the pin controller driver specific documentation

-Optional properties:
-#pinctrl-cells: Number of pin control cells in addition to the index within the
- pin controller device instance
-
-pinctrl-use-default: Boolean. Indicates that the OS can use the boot default
- pin configuration. This allows using an OS that does not have a
- driver for the pin controller. This property can be set either
- globally for the pin controller or in child nodes for individual
- pin group control.
-
-Pin controller devices should contain the pin configuration nodes that client
-devices reference.
-
-For example:
-
- pincontroller {
- ... /* Standard DT properties for the device itself elided */
-
- state_0_node_a {
- ...
- };
- state_1_node_a {
- ...
- };
- state_1_node_b {
- ...
- };
- }
-
-The contents of each of those pin configuration child nodes is defined
-entirely by the binding for the individual pin controller device. There
-exists no common standard for this content. The pinctrl framework only
-provides generic helper bindings that the pin controller driver can use.
-
-The pin configuration nodes need not be direct children of the pin controller
-device; they may be grandchildren, for example. Whether this is legal, and
-whether there is any interaction between the child and intermediate parent
-nodes, is again defined entirely by the binding for the individual pin
-controller device.
+See pinctrl.yaml

== Generic pin multiplexing node content ==

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
new file mode 100644
index 000000000000..d471563119a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pin controller device
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+ Pin controller devices should contain the pin configuration nodes that client
+ devices reference.
+
+ The contents of each of those pin configuration child nodes is defined
+ entirely by the binding for the individual pin controller device. There
+ exists no common standard for this content. The pinctrl framework only
+ provides generic helper bindings that the pin controller driver can use.
+
+ The pin configuration nodes need not be direct children of the pin controller
+ device; they may be grandchildren, for example. Whether this is legal, and
+ whether there is any interaction between the child and intermediate parent
+ nodes, is again defined entirely by the binding for the individual pin
+ controller device.
+
+properties:
+ $nodename:
+ pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
+
+ "#pinctrl-cells":
+ description: >
+ Number of pin control cells in addition to the index within the pin
+ controller device instance.
+
+ pinctrl-use-default:
+ type: boolean
+ description: >
+ Indicates that the OS can use the boot default pin configuration. This
+ allows using an OS that does not have a driver for the pin controller.
+ This property can be set either globally for the pin controller or in
+ child nodes for individual pin group control.
+
+additionalProperties: true
--
2.31.1
\
 
 \ /
  Last update: 2021-11-10 17:59    [W:0.077 / U:1.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site